CHAUVIN ARNOUX GX320 Function Generator

Chauvin Arnoux Metrix GX 320 [GX320] 0.001Hz - 20MHz Function Generator w/FM Modulation.The GX 320 is a 0.001 Hz to 20 MHz DDS function generator which provides much greater accuracy and frequency stability than a traditional generator. The GX 320 can be used to generate precise, varied signals: waveforms, sine, triangle, square & LOGIC, TTL output.The GX 320 is equipped with internal and external modulation (AM, FM), as well as linear and logarithmic sweep functions.Alongside this, the Shift K function allows phase or frequency skips.With the BURST function, users can choose the number of cycles per time period.

This allows even more detailed analysis, as well as the detection of very brief events.In addition, GX 320s can be set up in a cascade arrangement to simulate complex signals: three-phase network, Fourier synthesis, etc.This model also includes an external frequencymeter covering a range from 5 Hz to 100 MHz.This ergonomic instrument is equipped with a large LCD screen (125 x 45 mm) which is exceptionally easy to read because the main display comprises 5 digits 20 mm high.The backlighting is adjustable and the contrast can be boosted if necessary.15 complete configurations are stored in the GX 320,version -E

Part Number: GX320
Frequency range : 0.001Hz - 20MHz
DDS technology and frequency accuracy of ±20ppm
Frequency adjustment stable to the nearest digit
"LOGIC signal" function for direct adjustment of high and low levels
LIN or LOG sweep, triangle or sawtooth, with adjustable duration from 10ms to 100s
Internal and external AM & FM modulation, GATE, BURST, FSK and PSK functions
Adjustable phase synchronization of several generators in a cascade arrangement
100MHz frequency meter, 300V CAT I
Storage of 15 complete instrument configurations
Versions programmable via USB link and Ethernet with standard SCPI protocol

Include:
(1) GX320 - Function Generator
(1) Safety notice
(1) Power supply cable
(1) CD-ROM containing:
- Operating guide in 5 languages
- Programming in 2 languages
- USB ‘CP210x USB to UART Bridge Controller’ Drivers
- LabView and LabWindows Drivers
- USBxPress application (USB port identification)