- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
CHAUVIN ARNOUX XA3033 Bench Power Supply
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Chauvin Arnoux XA 3033 [XA3033] 3-Output, 30V DC Adjustable Bench Power Supply. The Multimetrix XA3033 is the triple-output DC laboratory power supply. This power supply have 3 digit display for voltage and current simultaneous. This power supply have fixed output.
Part Number: X3033
Input voltage : 110 VAC / 230 VAC ± 10 % 50 - 60 Hz
Voltage Master : Output 0 to 30 VDC ± 0,05 % + 5 mV; Slave output : 0 to 30 VDC ± 0,05 % + 5 mV
Current Master : Output 0 to 3 A ± 0,5% + 5 mA ; Slave: output 0 to 3 A ± 0,5% + 5 mA
2 adjustable outputs: 0-30.0 V DC / 0-3.0 A DC, and one fixed output: 5 V DC / 3 A DC.
Paralleling of the 2 independent outputs to obtain 6 A.
Serialization of the 2 independent outputs to obtain 60 V.
Control of the voltage and current with low noise.
Full protection against overloads.
Include:
(1) A3033 - Adjustable Bench Power Supply
(1) User’ manual
(2) Fuses T, 3.2 A, 250 V
(1) Mains cord

