KELLER ECO2 Digital Pressure Gauge

Rp. 17,500,000

NOTE
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.

Keller ECO2 Digital Manometer (31bar)
The Keller ECO2 Digital Manometer is an industrial pressure gauge that can measure pressure from -1bar to 31bar with accuracy of <0.5% FS and a resolution of 10mbar. Measurements are taken by the manometer’s piezoresistive pressure transducer and it has a 7/16” UNF male connector that can connect directly to access points without a hose, thus reducing fluid loss. It is supplied with an O-ring seal swivel ring that allows rotation through 360˚ and a G 1/4” connector is also included.

Readings are displayed on the Keller ECO2’s clear digital screen in a range of different units (bar, mbar/hPa, kPa, MPa, PSI, kp/cm2). It has a min/max recording feature that can be reset as required and a zero function is also available for carrying out relative pressure measurements.

There is an automatic off feature to help save the battery and the Keller ECO2 has a battery life of approximately 1000 hours. The solid outer casing makes the manometer resistant to water and dust ingress, as certified by an IP65 ingress protection rating.

Keller part number: 303060.0001
Key Features
Pressure range: -1bar to 31bar
Accuracy: <0.5% FS
Resolution: 10mbar
7/16” UNF male connector
O-ring seal provided
G ¼” adaptor
Clear digital screen
Min/max recording
Multiple units of measurement
Zero function for relative measurement
Battery life: 1000 hours
Ingress protection rating: IP65

What's In The Box?
Keller ECO2 Digital Manometer
O-ring seal swivel fitting
G ¼” adaptor