- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
IMADA DTXS Series Screw Cap Torque Tester
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Easy-to-use menus make programming simple in eight languages. Select units,set high/low setpoints, and all other functions in plain language.
The EL display is visible in dark and light locations and shows torque value, unit, peak, and can be configured with additional user-selectable data including memory data, +NG count, high/low setpoints, 1st and 2nd peaks, etc.
Color-coded LED indicators alert the user to Go/NoGo conditions. Orange lights for less than low setpoint, green lights between high and low, and red for over the high.
Process and transmit 2,000 actual data per second, not just the peak from a high sampling rate. Optional Force Recorder data acquisition software is designed to process up to 2,000 data per second.
ZT Logger data acquisition software downloads data from the tester memory or captures continuous data at 10 data/second. Zero the tester or capture data while at the computer. All tester programming can be set and saved from the software.
All DTXS cap torque testers include a 3 Point Certificate traceable to NIST. DTXS cap torque testers include AC adapter/charger, USB Cable, Driver CD, built-in Ni-MH rechargeable batteries, 1″ high standard pegs (optional long pegs, calibration kit and ISO Calibration available).
DTXS Series Cap Torque Tester
Standard Features
EL electro luminescent display is highly visible in the dark and bright sunlight
Easy-to-use, multi-language program menus: English, Spanish, French, Chinese, German, Italian, Korean, Japanese
Test cap loosening (CCW) and tightening (CW) torque on large containers
Export gauge memory or save continuous data to USB flash drives
Heavy duty metal construction
Selectable real time and peak modes
USB (virtual COM port), RS-232, Digimatic and analog outputs
Selectable lbf-in, kgf-cm and N-cm
Programmable High/Low setpoints with color-coded LED indicators & output signal
1,000 Data memory
Overload and low battery indicators
200% Overload capacity
Clamp diameters from .75″~6.25″; Optional small tables clamp diameters from .25″~2″
Kit includes four standard 1 inch pegs (other pegs available), AC adapter/charger and ZT Logger data acquisition software