- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current - Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
AEMC 5070 (2130.30) Megohmmeter/ Insulation Tester
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Megohmmeter Model 5070 is a fully automated 5000V graphical insulation tester. Selectable and programmable test voltage (40 to 5100V). Programmable temperature correction of resistance readings. The Model 5070 is the only megohmmeter to offer both a graphical plot of the test right on the instruments, as well as a digital presentation of the test results. It has a large graphic display with five line alphanumeric display and graph. It also offers the ability to program up to three step voltage profiles, each containing up to five steps. The Model 5070 has an RS-232 port which provides the ability to configure the unit and run the test from a PC. Test results can be generated directly to a printer using the DataViewTM graphing and analysis software.
Feature
True Megohmmeter with selectable test voltage from 40 to 5100 Volts
Insulation measurements from 30kΩ to 10TΩ
Automatic step voltage with programmable step and dwell times - three profiles can be stored, each with up to five steps
Programmable temperature compensation of resistance readings
Automatic calculation of DAR, PI and DD values
Direct measurement and display of Resistance, Test Voltage, Run Time, Capacitance and Leakage Current
Automatic test inhibition if live voltage is present
Automatic discharge and display of discharge voltage
Large graphic display with five line alphanumeric display and graph of all test results
Rugged weatherproof field case
RS-232 interface for direct printing of results
128kB memory for storing field test data
Remote operation from PC
Includes DataView Lite software
Applications
Test insulation on cables, transformers, motors, generators, insulators and wiring installations
High resistance or absorption tests
Spot reading tests
Timed resistance measurements
Dielectric Absorption Ratio (DAR) and Polarization Index (PI) tests
Multi-layer insulation testing (DD)
Test old or water damaged installations over long time runs
Motor insulation resistance measurements
Computer controlled production line testing
Predictive maintenance by storing results in PC for trend analysis
User selectable voltage testing to provide application specific testing
What's in the Box:
(3) Integral Hippo Clips
(1) Rechargeable Battery
(1) Jumper Lead
(1) 6ft RS-232 DB9/DB25 F/F to DB9/DB25 F/F Cable
(1) DataView Lite Software
(1) Soft Accessory Bag
(1) Instruction Manual