- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
VAREG VG-CS200 Digital Micro-Ohmmeter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The micro-ohmmeters VG-CS200 and VG-CS600 are used for ohmic measurements of high power switches etc. Both instruments are identical, except the maximal measuring current. The strengths of the instruments are the easy handling, rugged design and low weight. The two different kinds of displays, red LED and back lighted LCD, enables measuring in darkness, coldness and full sunlight.
Designed for continuous measurements, the instrument has no limitation for the numbers of current cycles. An internal thermal printer is standard to enable logging of test results. With the option “ remote logging” all stored measuring values can be downloaded to a personal computer or laptop. A cable remote control is optionally available.
The VG-CS200, with a weight of 8kg only, makes it very handy and easy transportable and the rugged case contains all test cables.
Typical applications are ohmic tests of:
- Circuit breakers
- Disconnecting switches
- High current busbar joints
- Cable splices
- Welding joints
- Ground connections
Micro-Ohmmeter Remote Control
The remote control unit is used to control and monitor the VG-CS200/ 600. Integrated sense inputs enables remote controlled tests directly on the device under test. A 2-line back lighted LCD-display shows test parameters and results which can be sent to the printer. Three light emitting diodes indicates the status of the test in progress. The housing is waterproof and is specified to DIN40050/ IP67.