- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
METROHM LLT-13.8KV-KIT High Voltage Live Line Tester
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
This kit contains a selection of items that are designed for comprehensive testing of high voltage systems up to 13.8kV.
An upgraded version of the basic kit of this device, this full kit contains everything the user needs to carry out HV testing on overhead lines, switchgear and other applications. The main difference between this kit and the basic kit is the inclusion of a phasing rod, two extension rods for reaching more difficult applications and overhead line/bent-end adaptors for attachment to switchgear and overhead HV lines. All the equipment is also supplied in a large, heavy-duty carry case (the basic kit only ships with a soft carrying case).
The main testing rods allow the user to easily evaluate the current level of voltage passing through a HV system. Once attached the reading taken is shown directly on an analogue meter that is integrated into the testing rod and this can be rotated to make viewing results simple even when working at an angle. An earthing lead is also attached to the testing rod to enable current to flow directly to earth.
Both the phasing rods and the testing rods can be extended by using the extension rods included as part of this kit. This makes it much easier to reach difficult HV installations and the included adaptors also make it much easier to connect directly to the application under test.
The rods are made of high quality fibreglass/polycarbonate and are fully suitable for use indoors, outdoors and even in wet conditions.
Metrohm LLT-13.8kV High Voltage Live Line Tester Key Features
Suitable for use with HV systems up to 13.8kV
Overhead line, switchgear and substation testing
Includes voltage testing rods and phasing rods
50/60Hz operation
Suitable for use indoors, outdoors and in wet conditions
Ships with extension rods for extending height of standard rods
Adaptors also included for easier attachment to HV systems
IEC1243 compliant
Proving unit included to verify testing accuracy
Rotatable analogue meter attached to rod
Full List of Products Included
Metrohm LLT-13.8kV High Voltage Live Line Tester and Earth Lead
Phasing Rod with Phasing Lead
Proving Unit
2 x Extension Rods
2 x Bent End Adaptors
2 x Overhead Line Adaptors
Cleaning Kit
Heavy Duty Carry Case

