- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current - Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
PANAMETRICS Dew IQ Moisture Analyzer
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The GE Panametrics dew.IQ Trace Moisture Analyzer is an economical, single channel, aluminum oxide hygrometer in the IQ Series line of analyzers. It is intended for industrial applications requiring accurate, real-time moisture measurement.
Installing the dew.IQ is highly intuitive. As a field upgrade for its predecessors, the Panametrics MMS35, System 580, Model 600 and 700 or even earlier models, the M Series probe and cable mate to the dew.IQ in minutes, minimizing installation costs. For new installations, the IQ.probe stores its calibration digitally, eliminating the need for shielded cable.
The microprocessor-based dew.IQ accurately tracks fast-changing process conditions, and displays the moisture content as dew/frost point temperature in °F or °C or as ppmv with a constant pressure input on an LCD. The measurement is also available as an analog output. The dew.IQ features built-in isolation to ensure the integrity of signals to remote devices. The meter also features two Form C alarm relays for high and low moisture limits. The large display and six-button keypad combine to make selection of analog output zero and span, alarm set-points fast and easy, and entry of calibration data simple.
Designed for installation in industrial settings, it is used in conjunction with IQ.probe and M Series moisture probes for industries including:
Industrial gas
Furnace gas/heat treating
Power generation
Air dryer
Pharmaceutical
Aerospace
Features:
Rack, bench, panel (1/8 DIN), and wall mount configurations
NEMA 4 weatherproof membrane front display/keypad
M Series or IQ.probe moisture probe compatible
Displays moisture content in dew/frost point and ppmv
Built-in isolated current or voltage analog output (switch selectable)
One fail-safe fault alarm relay
Two Form C measurement alarm relays
Operating temp: -4 to 140°F (-20 to 60°C)
Datalogger using MicroSD card, 2 GB card included
Universal power 100-240 VAC @ 50-60 Hz, or 24 VDC nominal
Standard dew point range: -112 to 68°F (-80 to 20°C) with data to -166°F (-110°C)
Accuracy:
±2°C (3.6°F) from -85 to 50°F (-65° to 10°C)
±3°C (5.4°F) from -112 to -87°F (-80° to –66°C)
What's In The Box:
(1) GE Panametrics dew.IQ
(1) Manual