- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
CHRIS MARINE LEMAG DI-5C Crankshaft Deflection Gauge
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
LEMAG DI-5
The LEMAG Electronic Crankshaft Deflection Indicator – LEMAG DI-5 – replaces the time consuming, risky and unpleasant tasks of a mechanical micrometer dial. Thanks to its simplicity, the deflection indicator can be used regularly for deflection checks, and thereby identify potential problems to avoid expensive engine repairs.
The new LEMAG DI-5 can be upgraded by the manufacturer to version DI-5C. There is no need to replace the entire device.
After the upgrade the device features an interface for transferring the data to a computer.
In addition, LEMAG DI-5 can be combined with an ovality kit for measuring cylinder liner ovality and comparing bore liner wear for diameters of 180 – 600 mm and stroke up to 870 mm.
Features
Large measuring range
Invar alloy extension bars for minimum heat expansion
Backlit display
Rechargable lithium ion batteries
Complete set with transducer, cable, extension bars and case
LEMAG DI-5C
The LEMAG Electronic Crankshaft Deflection Indicator – LEMAG DI-5C – is the latest innovation in crankshaft deflection measurement.
LEMAG DI-5C is equipped with a micro processor, which enables the user to print and download measurement results.
It consists of a transducer with various extension bars made of invar alloy. which ensures minimal heat expansion.
The device is delivered with a strong instrument case, rechargeable batteries and a charger.
Features
Large measuring range
Capable of storing 53 cylinder reports (up to 24 cylinders / engine)
Invar alloy extension bars for minimum heat expansion
Can be equipped with an ovality kit to measure cylinder wear
Prints and downloads data to a PC
Scope of supply
Deflection Indicator LEMAG DI-5C with a transducer and various extension bars
Interface connection cable and software
Calibration certificate
Delivered in a strong instrument case
Ready to use package with rechargable batteries and batteries
DI-5C Ovality kit (optional)
The ovality kit is designed to measure cylinder liner wear and ovality.
The standard kit enables cylinder liner measurements with diameters between 180-600 mm and stroke up to 870 mm.
Larger ovality kit sizes are also available on request.