- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
TSI ALNOR 7545 IAQ Calc Indoor Air Quality Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The TSI Alnor IAQ-CALC 7545 meter is an outstanding instrument for investigating and monitoring indoor air quality. The 7545 simultaneously measures and datalogs multiple parameters including CO, CO2, temperature, humidity and is capable of performing calculations such as dew point, wet bulb temperature, and % outside air. With such a wide range of functions in a handheld meter, the 7545 is an excellent choice for a wide range of applications such as verifying HVAC system performance and to ensure compliance with IAQ regulations and guidelines.
The TSI Alnor IAQ-CALC 7545 meter utilizes stable, accurate sensors and displays up to three parameters simultaneously. An internal datalogger feature logs up to 26, 900 data points with all measured parameters enabled. Data can also be easily transferred to a computer with the included LogDat2 software which facilitates easy report generation and includes a statistics function that displays average, maximum and minimum values, and the number of recorded samples.
TSI Alnor IAQ-CALC 7545 meters ship complete with meter and probe, Logdat2 downloading software with USB cable, AC adaptor, hard carrying case, batteries, operation and service manual, and NIST calibration certificate.
Features
Part number 7545
Manufactured by TSI Alnor
CO2
Range: 0 to 5000 ppm
Accuracy: ± 3.0% or ± 50 ppm, whichever is greater
Sensor Type: Dual-wavelength NDIR
CO
Range: 0 to 500 ppm
Accuracy: ± 3.0% or ± 3 ppm, whichever is greater
Sensor Type: Electro-chemical
Temperature
Range: 32 to 140° F ( 0 to 60° C)
Accuracy: ± 1.0° F ( ± 0.6° C)
Sensor Type: Thermistor
Relative Humidity
Range: 5% to 95% RH
Accuracy: ± 3.0% RH
Sensor Type: Thin-film capacitive
Calculates % outside air, dew point & wet bulb temperature
Datalogs up to 26, 900 data points with all measured parameters enabled
Log intervals: 1 second up to 1 hour ( user selectable)