- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
SOLINST 415 Submersible Pump Controller
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Solinst Model 415 [115458] Submersible Pump Controller, 12 Volt DC. The Solinst 12V Submersible Pump provides an efficientmeans of purging and obtaining groundwater samples frommonitoring wells.The 12V Submersible Pump and 12V Pump Controller arelightweight, portable, and easy to set up, deploy and operate.The Pump’s sleek, short design ensures it fits easily down wellswithout hang-ups.The Solinst 12V Submersible Pump is capable of pumpinggroundwater from 36.5 m (120 ft) below ground surface, withflow rates up to 13.5 L/min (3.6 US gpm) in shallow conditions.
Part Number: 115458
Power source: 12 Volt DC
Very simple to operate and adjust from high to low flow rates
Smooth, short (6" nominal) Pump design avoids getting stuck in wells that aren’t straight or plumb
Fits inside Nominal 2" OD Sched. 40 or 80 PVC Pipe
Convenient LED light indicates 12V Pump Controller status and Pump operation
Lightweight, compact, portable system
Applications:
High and low-flow groundwater sampling for general chemistry
High purge rates ideal when sampling using three volume purge protocol
Useful when performing constant head tests in environments with high K (hydraulic conductivity
Specification:
Sampling Depth: As much as 36.5 m (120 ft) below ground surface
Flow Rates: Up to 13.5 L/min (3.6 US gpm)
Pump Cable Length: 130 ft (40 m)
Pump Cable Weight: 3.5 kg ( 7.8 lbs)
Wetted Materials: ABS pump body, 304 stainless steel motor, impeller and eyebolt, polypropylene hose barb, nitrile/buna o-rings and seals, PVC jacket electrical wire
Pump Size: 4.78 cm OD x 13.97 cm long (1.88" x 5.5")
Pump Weight: 0.8 kg (1.8 lbs)
Controller Size: 33 cm x 13 cm x 17 cm (13” x 5” x 6.5”)
Controller Weight: 3.4 kg (7.5 lbs)
Controller Cable Length: 1 m (3.5 ft)
Power Source: 12V Deep Cycle 60 amp AGM Battery or larger, or vehicle or marine battery.
Voltage Required: 12.5V–15V at source
Power Draw: 20mA (when dial is OFF), 3A (dial is at 1) to 36A (dial is at MAX (10))
Max. Run Time: Continuous, as long as Pump fully submerged during operation
Warranty: 12V Submersible Pump: 90 Days; 12V Pump Controller: 3 Years
Include:
(1) 115458 - Submersible Pump Controller, 12 Volt DC
(1) Instruction Manual