- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
GEOTECH (81400303) 60 Meter Geosub 2 Stainless Steel Pump
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Geotech Geosub 2 (81400302) is a versatile 1.75" OD stainless steel submersible pump designed for groundwater sampling in 2-inch or larger wells, capable of reaching depths up to 200 ft (61m). Key features include low-flow sampling rates down to 10 mL/min, easy decontamination, field-replaceable motor leads, and an included controller. The Geotech Geosub 2 (81400302) is a stainless steel, single-stage DC submersible pump designed for environmental groundwater sampling, capable of low-flow rates down to 10 mL/min. and depths up to 200 ft (61 m). The system includes a 2/3 HP pump, a controller for variable power (up to 300W DC), and a 200 ft cable. This stainless steel sampling pump is the most versatile single stage DC pump in the industry. Designed with all stainless steel components, the Geosub 2 allows you to sample with confidence even in the harshest well conditions. TheGeosub 2 operates with the Geotech Geosub 2 Controller.
Part Number: 81400302
Model: Geosub 2
Kits: Motor Lead & Hand Reel, 200 ft. (61m)
Performance: Can lift water from 200 ft (61 m) and offers flow rates as low as 10 mL/min for precise, low-flow sampling.
Design & Materials: Constructed with 316 stainless steel, PTFE, and Viton® for durability in harsh conditions.
Controller: Operates with a dedicated controller that converts AC voltage to a variable DC output (up to 300 Watts), offering speed control.
Safety & Maintenance: Features user-enabled dry-run protection, field-replaceable motor leads, and is easy to clean for decontamination.
Versatility: Compatible with optional drop tube assemblies for greater depths, and can be used with portable reel systems.
Dimensions: 13.2" L x 1.75" OD (34 cm x 4.5 cm).
Weight: Approximately 4 lbs (1.8 kg) without the lead.
Applications:
Groundwater Sampling & Purging: Used for routine, low-flow sampling to minimize disturbance in monitoring wells.
Environmental Remediation: Extraction of contaminated water/fluids for treatment, including in mining and, oil and gas industries.
Hydrogeologic Studies: Data collection for aquifer characterization and flow dynamics.
Site Assessment: Monitoring well sampling for contamination assessment.
Include:
(1) Geosub 2 - Stainless Steel Pump
(1) Motor Leads, Pre-attached to the pump.
(1) Portable Geo Reel with 200 ft (61m) of wire/cable
(1) Discharge Port Connection w/1/4" female NPT connection with a 3/8" hose barb.
(1) Instruction Manual