Categories
- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
SPM VC200 VibChecker Vibration Meter
Rp. 50,000,000
NOTE
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
VibChecker is an instrument for fast and easy measurement of machine condition in preventive maintenance. It is based on the recommendations of ISO 2372 and ISO10816 standards for broad band measurements of vibration. These standards make the assumption that limited information, obtained easily and at a low cost, is often as useful as a detailed analysis using expensive equipment and elaborate techniques.
The instrument measures either with a built-in probe (VC200) or with an external transducer. It is push button controlled and basic measurement data are entered manually. Evaluated measuring results are indicated by greenyellow-red symbols, and a time signal and its FFT spectrum are produced for easy pattern recognition. Measurement results can also be transferred to a file for further processing, e.g. in Microsoft Excel.
SPECIFICATION
Frequency range 10 to 1000 Hz
Readings RMS/peak/peak-to-peak
Measuring range (sinus signal and 100 mV/g accelerometer)
Velocity RMS 100 mm/s (4 ips) at 80 Hz
Acceleration RMS 100 m/s² (10 g) at 10-1000 Hz
Displacement RMS 100 um (4 mil) at 80 Hz
Condition evaluation according to ISO2372 and ISO10816 Part 2, 3, 4 >600 rpm
Spectrum linear, 200/400/800 lines, Hanning window, Hz/cpm, zoom, RPM markers
Time signal 512/1024/2048 samples, zoom, marker
General functions battery status, transducer check, metric or imperial units, language independent menus, storage of up to 10 measuring samples
Condition indication green, yellow and red symbols
Display 2.4" Color TFT LCD Display
Keypad sealed, snap action
Material, casing copolyester/TPE
Protection class IP65
Power supply 3.63 V Lithium Ion, USB rechargeable
Battery life > 25 hours of normal use
Internal transducer accelerometer type MEMS
Input connector mini coax, for external transducer
External transducers vibration transducer TRM100/ TRM120 or IEPE (ICP®) type transducers with voltage output
Output connector mini-B USB
Operating temperature –10 °C to +50 °C (14 °F to 122 °F)
Size 207x74x41 mm (8.1x2.9x1.6 in)
Weight 335 g (11.8 ounces)