- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
RION VM82A Portable Vibration Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Portable and Easy to Use Vibration Meter
The Rion VM-82A is a hand-held Vibration Meter capable of storing up to 1000 measurements from Acceleration, Velocity and Displacement.
The unit's backlit LCD display is capable of showing battery status, overload indications, vibration level in a bar graph as well as indication characteristic levels RMS, EQ PEAK and EQ Peak-Peak.
The VM-82A also supports using a wide range of Rion accelerometers, allowing the VM-82A to measure a wide range of vibration data depending on the accelerometer used allowing the user to customise the VM-82A to their requirements.
The VM-82A is capable of operating for up to 24 hours on a set of batteries, rechargeable Ni-MH batteries are supported as well.
The Rion VM-82 is capable of the following:
Measuring Vibration Acceleration, Velocity and Displacement
Acceleration sensitivity range of 0.02 to 200 m/s²
Velocity sensitivity range of 0.3 to 1000 mm/s
Displacement sensitivity range of 0.001 to 100 mm
Weighted AC and DC level output

