CYGNUS DIVE Underwater Ultrasonic Thickness Gauge

Now with its new brightly colored AMOLED display; the Cygnus Dive Mk2 provides clear viewing from all angles for the diver and his camera, even in poor visibility. This robust, wrist-mountable, underwater, ultrasonic, metal thickness gauge has been designed for the professional diver and can be worn on the forearm, providing an invaluable free hand while performing metal thickness measurement surveys underwater. As with all Cygnus products, the Dive Mk2 has been designed for easy operation, and with only two buttons to operate, provides quick and easy menu navigation using just one hand.

Rated to a depth of 300 meters, the Dive Mk2 underwater thickness gauge delivers accurate meter readings, is reliable and simple to use. Topside Repeater can also overlay the real-time thickness measurement on to a composite video signal, displaying it on the monitor screen / video recording of the survey.

The Multiple Echo technique is at the heart of the electronics and ensures coatings up to 20mm thick are ignored and that measurements are automatically verified. The Dive Mk2 can measure through corrosion and through coatings up to 20mm thick (when in ‘Deep-Coat’ mode) using the Single Crystal Probe Option. The introduction of Twin Crystal Probe Option for use with the gauge in single-echo mode offers flexibility for specific situations where there are no protective coatings. These applications include uncoated surfaces with extreme front and back wall corrosion, anchor chain links and highly attentive materials such as cast iron.

The new CygLink v4 software offers a wide range of options for recording and displaying measurements. On-Board Data Logging Capability adds data logging capability to the gauge, supplied with CygLink software for data transfer and measurements can be recorded in either a linear or grid format.

Features:
Wrist mountable giving the diver a free hand
Large, brightly colored AMOLED display, highly viewable by diver and camera in poor visibility
A-Scan display to assist with measurement verification
Auto-Log Data Logging - option, no log button to press - stores up to 5,000 measurements with A-scans
Multiple Echo means no need to remove protective coatings up to 20 mm (0.787") thick
Error-checked Multiple Echo measurements to ensure genuine, verified measurements are displayed
Deep Coat mode to measure through coatings up to 20 mm (0.787") thick
Single Echo mode with twin crystal probes
Probes are connected to the DIVE with a coiled double jacket cable which will extend up to 1 meter (3 ft)
Pressure tested to 300 meters (1,000 ft)
Rechargeable Lithium-Ion battery giving up to 11 hours continuous operation.

Specifications:
Size: 4.1 in x 4.3 in x 1.4 in (105 mm x 110 mm x 35 mm)
Battery Life: Rechargeable Lithium-Ion Battery Pack, 10 hours
Weight in Air: Complete Gauge 2 lb. (905 g)
Operating Temp: 14°F to 122°F (-10°C - +50°C)
Measurement Range:
0.120 in.- to 9.995 in. (3 mm - 250 mm) in Steel with 2.25 MHz probe
0.065 in.- to 6.000 in. (2 mm - 150 mm) with 3.5 MHz probe
0.045 in.- to 2.000 in. (1 mm - 50 mm) with 5.0 MHz probe
Accuracy -
±0.002 in. (±0.05 mm) High Resolution (<4 in)
±0.005 in. (±0.1 mm) Low Resolution
Display: 2.4 in. Color TFT with LED Backlight 320 x 240 pixels
Receiver: Automatic TCG, 1 to 10 MHz Bandwidth 10 Bit Digitizer 60 MSPS
Data Storage: 32 Mb Flash Memory (5000 Measurement Points)
Warranty: 3 years on DIVE Gauge, 6 months on Probe
Data Output: RS-485 Half Duplex to DIVELink
Certification: BS EN 15317:2007
Depth Rating: IP68 Rated to 984 feet (300 m) continuous immersion in sea water