- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
Waygate Krautkramer DMS Go+ A-Scan Base Thickness Gauge
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The GE Inspection Technologies DMS Go Thickness Gauge combines an intuitive user interface, powerful data management, and an ability to provide accurate, reliable and comprehensive thickness inspection data. It has automatic gain control for excellent repeatability and corrosion monitoring. The main unit comes in three models:
DMS Go+ Basic
Uses A-scan verification and is compatible with high quality D-Meter dual element probes to handle a wide range of corrosion thickness applications.
DMS Go+ (Base)
Takes the basic features and adds B-scan (timed) for cross-sectional view and compatibility with single element probes for precision thickness measurement and temperature compensated readings up to 1000°F (540°C).
DMS Go+ Advanced
Can do all of the above and provides additional features of 6 data recording file structures plus 3D & 4D via UltraMATE and TopCoat/Auto-V measurement capabilities to eliminate removal of many coatings.
GE Inspection Technologies DMS Go Thickness Gauge Applications
Oil & Gas
Inspection and monitoring of corrosion in tubes, vessels and tanks
Measurement of remaining wall thickness through paint coatings
Power Generation
Inspection of complex geometry tubes
Monitoring boiler efficiency by measuring oxide scale in boiler tubes with special probe OSS-10
Aerospace
Maintenance checks
Metals Industry
Thickness measurement of austenitic materials
Features
DMS Go+ comes with D-pad (arrow key) control
0.010 to 25in (0.40 to 650mm) measuring range in steel
0.0098 to 0.6299in/µs (250 to 16,000m/s) mat. velocity
0.0001 or 0.01in (0.01 or 0.1mm) display resolution
LCD display, 800 x 480 pixels
USM Go flaw detector upgrade available
Flip function allows for left or right hand use
Vibration and shock tested
IP67 sealed for dust & water protection
What's in the Box
Lithium Ion "on-board" rechargeable battery
Battery charger /AC power supply
LCD screen protectors (10-pack)
SD card (8GB)
Transport case
Hand strap
Quick reference card
Operating manual on CD
Certificate of conformity
Couplant sample