Categories
- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
SKF TKDT10 Digital Contact Thermometer
Rp. 18,500,000
NOTE
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The SKF TKDT 10 is suitable for a wide range of applications and has the facility to allow two SKF temperature probes to be connected. The device also offers a number of features that enhance ease-of-use. For example, it can display two measurements simultaneously, show their temperature difference and display minimum, maximum or average values to further support the measurement task.
While contact temperature devices are not typically supplied with a probe, the SKF TKDT 10 comes equipped with the SKF TMDT 2-30 temperature probe, which is also suitable for many applications. In addition, SKF TKDT 10 features a large back-lit LCD helping to ensure that the temperatures can be seen in even poorly lit environments with the possibility to freeze the display to further enhance easy reading. The instrument is supplied in a sturdy carrying case to ensure a long lifespan.
"The SKF Thermometer TKDT 10 is a valuable instrument for use in ODR programmes or by the maintenance team,” says Mark Ely, SKF Product Manager. “Supplied with a high quality temperature probe, users can be confident in obtaining fast, easy and accurate machine temperature measurements.”
Technical Data
Designation TKDT 10
Display Large Backlit LCD
Displayed resolution 0,1° up to 1 000°, otherwise 1°
Backlit display On/Off
Measurement modes Min, max, average, differential, dual temperature reading
Measurement units °C, °F, K
Auto switch off 20 minutes, on/off
Temperature using probe –200 to +1 372 °C (–328 to +2 501 °F)
Accuracy > –100 °C (> –148 °F): ±0.5% of reading ±1 °C (1.8 °F)
Probe compatibility 2™ Type-K connectors
Probe supplied TMDT 2-30, suitable for use up to 900 °C (1 650 °F)
Supplied probe length 130 mm (5.1 in.)
Probe response time 2,3 seconds (TMDT 2-30)
Battery 3x AAA Alkaline type IEC LR03
Operation time 18 hours typical use (backlight on)
Product dimensions 160 ™ 63 ™ 30 mm (6.3 ™ 2.5 ™ 1.2 in.)
Product weight 200 g (0.4 lbs)
Operating temperature 0 to 50 °C (32 to 120 °F)
Storage temperature –10 to +60 °C (–4 to +150 °F)
Relative humidity 10 to 90% RH non-condensing
IP rating IP 40
Kit contents Thermometer with 1™ Contact probe TMDT 2-30, 3™ AAA batteries, 1™ printed instructions for use
What's In The Box
SKF TKDT 10 Thermometer
Contact Temperature probe TMDT 2-30
(3) AAA Batteries
Instruction booklet