- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
KIMO CT110 Portable Digital Tachometer
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Measure RPM and associated parameters with ease with KIMO's CT110, a dual-function contact and non-contact tachometer!
This unit is supplied as standard with both an optical tachometry probe and a tip for contact measurements. As it can do both measurement types, the KIMO CT110 can be used in applications where a standard contact tachometer couldn't be used, allowing you to measure safely.
KIMO's CT110 tachometer can measure RPM (using the optical mode) from 0 to 60,000 RPM. In the contact mode, it can measure in RPM, m/min, ft/min, in/min and m/s across a range from 0 to 20,000RPM.
There's also a HOLD function included on the CT110 (freezes the current display temporarily), the ability to display MAX/MIN values taken over a period of time and this tachometer also has a built-in backlight and configurable automatic shutdown.
Features:
Dual capabilities - both a contact and a non-contact tachometer
Contact mode - uses a light beam from a diode which is reflected by a rotating mirror located inside the probe head. A light sensitive cell detects the frequency of the signal of the beam which is proportional to the rotation speed
Optical (non-contact) mode - a light beam is emitted from the diode of the probe and is reflected by a piece of reflective tape (included) on the measured elements. A light-sensitive cell detects the beam and translates it in frequency signal which is proportional to the tape rotation speed
Optical mode measures in RPM only with measurement range from 0 to 60,000RPM
Contact mode measures in RPM, m/min, ft/min, in/min or m/s with range from 0 to 20,000RPM
HOLD function freezes current values shown on the screen
Display the MAX/MIN measurements taken over a period of time
Configurable automatic shutoff
Backlit LCD screen
What's In The Box:
(1) KIMO CT110 Optical and Contact Tachometer
(1) Optical Tachomerty Probe (17mm Diameter, 195mm Length)
(1) Contact Tachometry Tip
(1) 50cm of Reflective Tape
(1) Calibration Certificate
(4) AAA Batteries
(1) Transport Case
(1) User manual