- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current-Echosounder
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
MARTINDALE SPL82 Data Logger Sound Level Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Martindale SPL82 Data Logging Sound Level Meter is a Class 2 sound level meter that can be used to measure and log sound readings between 30 and 130dB. It is able to record up to 64000 results. These features make it ideal for maintaining compliance with noise and work legislation pertaining to industrial and office environments.
This instrument also has a frequency range of 20Hz to 8KHz and can perform A and C frequency weighting. It is also capable of fast and slow time averaging and can ascertain the minimum and maximum values detected.
Further to this, the Martindale SPL82 Data Logging Sound Level Meter can be connected to external recording devices via the AC and DC outputs. It can also be connected to the user’s PC via the included micro-USB cable and is supplied with PC software for the downloading of results.
When conducting measurements over an extended period of time, the Martindale SPL82 Data Logging Sound Level Meter may be placed on a tripod mount and may be powered using an external source. Conversely, this instrument also includes an Auto Power Off function which will switch the sound meter off after long periods of inactivity, thereby preserving the meter's battery life.
This BS EN 61672-1 compliant meter is supplied with a storage case and windscreen. The Martindale SPL82 Data Logging Sound Level Meter is ideal for measuring noise levels over extended periods of time in offices and industrial environments.
Martindale SPL82 Data Logging Sound Level Meter Key Features
A Class 2 sound level meter
Measure and log measurements between 30 and 130dB
Record up to 64000 readings
Ideal for maintaining compliance with noise and work legislation pertaining to industrial and office environments
A frequency range of 20Hz to 8KHz
Perform A and C frequency weighting
Fast and slow time averaging
Can ascertain the minimum and maximum values detected
Connect to external recording devices via AC and DC outputs
Connect to a PC via the micro-USB cable
Supplied with PC Software for downloading results
Can be placed on a tripod mount and powered using an external source
Can be powered using the supplied batteries
Auto Power Off function
BS EN 61672-1 complaint
Supplied with a storage case and windscreen
Ideal for measuring noise levels over extended periods of time in offices and industrial environments
What’s Included?
Martindale SPL82 Data Logging Sound Level Meter
Storage Case
4x 1.5V AAA Alkaline Batteries
PC Software (on CD)
Micro-USB Cable
3.5mm Plug
USB Stick
Instruction Manual