- Air Quality Meter
- Anemometer
- Battery Test Analyzer
- Calibration Tester
- Chart Data Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
EXTECH 407790A Real-Time Octave Band Analyzer
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Extech 407790A Octave Band Analyzer is a type 2 integrating sound level meter with Octave and 1/3 Octave Band real time display. The 407790A offers five measurement parameters: SPL (Sound Pressure Level), Leq (Equivalent Continuous Sound Pressure Level), SEL (Sound Exposure Level), Lmax (Maximum Sound Pressure Level), and Lmin (Minimum Sound Pressure Level).
The Extech 407790A Octave Band Analyzer has a range from 30 to 130dB with a standard accuracy of ±1.5dB (ref 94dB @ 1kHz). The 407790A features 1/1 and 1/3 Octave Band real‐time noise analyses. The built‐in memory stores 12,280 data records in sound level mode and 1024 records in Octave mode. The stored data can be easily transferred to a PC with the 407790A software and USB cable. This meter permits choice of ‘A', ‘C', or Flat 'Z' weighting and Slow / Fast /impulse response times. AC and DC analog output signals are available for chart recorders and other external recording devices.
Features
Range from 30 to 130dB
Accurate to ±1.5dB (ref 94dB @ 1kHz)
Can perform 1/1 and 1/3 octave band analysis simultaneously
1/1 octave band analysis from 31.5Hz to 8kHz
1/3 octave band analysis from 25Hz to 10kHZ
160 x160 dot matrix backlit LCD displays Leq, LE, Lmax, Lmin, Lp, L05, L10, L50, L90, L95
Datalogging function stores over 12,000 readings
A, C and Z weighting with Fast or Slow response
Meets ANSI and IEC Type 2 standards
Internal self-test when powered ON
Detachable 0.52" (13.2mm) diameter condenser microphone and Tripod mount provided on rear
Analog AC/DC recorder output
Transferred data to a PC to be analyzed using software and cable provided
What's in the Box
Windows® compatible software
USB cable
4 x C batteries
Microphone wind screen
Mini screwdriver
120V AC adapter
Case

