BK Precision RFM3002-GPIB RF Power Meter

The RFM3000 Series of meters work in combination with B&K Precision's RFP3000 Series of USB RF Peak Power Sensors to extend their capabilities and eliminate the need for a remote computer. This benchtop solution supports capturing, displaying, and analyzing peak and average RF power in both the time and statistical domains through an intuitive, multi-touch touchscreen display.

 

Two on-screen markers can be dragged over a waveform for greater measurement details. A selection of useful trigger options and channel synchronization settings provide the perfect tool set for working with multiple channel measurements.

 

Manufacturer Specs

RFM3000 Series

Channels RFM3002 / RFM3002-GPIB - 2 channels; RFM3004 / RFM3004-GPIB - 2 channels

Display

Display Size 5-inch WVGA multi-touch display with intuitive graphical user interface

Display Modes Graph (power vs time) - Numeric (numeric data) - Statistical measurements - CCDF

Automatic measurements (pulse, statistical, and marker measurements)

Marker Measurements (in Graph view)

Markers (vertical cursors) Settable in time relative to the trigger position

Marker Independently Avg, Min and Max Power at a specified time offset

Interval Between Markers Avg, Min and Max Power over the defined interval

Pair of Markers Ratio of power values at each marker

Pulse Mode

Automatic Measurements Pulse rise-time - Pulse fall-time - Pulse width - Pulse off-time - Pulse period - Pulse repetition frequency

Pulse duty cycle - Waveform average - Pulse peak - Pulse average - Pulse overshoot - Pulse droop

Top level power - Bottom level power - Edge delay - Pulse edge skew between channels

Statistical Mode

Automatic Measurements Peak power - Average power - Minimum power - Peak to average ratio - Dynamic range

Percent at cursor - Crest factor at cursor - Crest factor at various percents

Trigger

Synchronization Internal trig distribution

Mode Normal, Auto, Auto Pk-to-Pk, Free Run

Source Any connected RTP Series sensor (via SMB’s) or rear panel external trigger

Internal Level Range -40 dBm to +20 dBm (sensor dependent)

External Level Range ± 5 volts or TTL

Slope + or -

Hold-off, Min Pulse Width, Max Trigger Rate Sensor and timebase dependent

Time Base

Time Base Resolution, Range, Accuracy Sensor dependent

Time Base Display Sweeping or roll mode

Trigger Delay Range Sensor dependent

Trigger Delay Resolution 0.02 divisions

Inputs/Outputs (front panel)

USB with SMB trigger port 4 ports USB2.0: Type A receptacle, 4 ports SMB(f)

Test Source

(optional rear panel placement) 50 MHz 1.00 mW (0 dBm) ± 2.3% (0.1 dB) typical

Inputs/Outputs (rear panel)

LAN 10/100 Ethernet: RJ-45 modular socket

USB with SMB trigger port 4 ports USB2.0: Type A receptacle, 4 ports SMB(f)

Multi I/O Connector User Selectable Status, trigger, or voltage output

Range 0 to 10 V (Analog unipolar)

-10 V to +10 V (Analog bipolar)

0 or 5 V (Logic)

Accuracy ±200 mV (±100 mV typical)

Linearity 0.4% typical

Remote Control

Command Set SCPI-1999.0

LAN Ethernet: 10/100/1000 BaseT; HiSLIP

GPIB RFM3002 / RFM3004 - optional; RFM3002-GPIB / RFM3004-GPIB - included

Regulatory Compliance

CE compliance with the following

European Union directives Low Voltage Directive: 2014/35/EU, RoHS Directive: 2011/65/EU,

WEEE Directive 2012/19/EU,

Electromagnetic Compatibility Directive (EMC): 2014/30/EU and

Environmental: MIL-PRF-28800F, Class 3

General

Power Requirements 90 to 260 VAC, 47 to 60 Hz; 90 to 135 VAC, 47 to 400 Hz; 30 W (35 VA) max

Operating Temperature 0 to 50 °C (32 to 122 °F)

Storage Temperature -40 to +70 °C (-40 to 158 °F)

Humidity 95% maximum, non-condensing

Altitude Operation up to 15,000 feet (4600 m)

Shock Withstands ± 30 G, 11 ms impulse in X, Y, and Z axes

Vibration Withstands 2 G sine, 5 to 55 Hz; 2 G random, 5 to 500 Hz

Warranty 3 Years

Dimensions (excluding connectors) (H x W x D) 3.5" x 8.3" x 11.2" (89 x 211 x 284 mm)

Weight 4.8 lbs (2.2 kg)

Included Accessories Power cord

Optional Accessories RKRFM Full-width 19” Rack Mount Kit (includes handles & hardware for mounting one or two meters)