MEGGER OTS60SX 60KV Semi Automatic Oil Test Set

MEGGER OTS60SX 60KV Semi Automatic Oil Test Set

Rp. 95,000,000
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.

Lightweight portable unit for field use
Simple, semi-automatic operation
Suitable for all oil breakdown testing to 60 kV
Automatic 1 minute timer for easy withstand testing

The Megger® OTS60SX is a lightweight, semi-automatic, oil dielectric strength test set. The instrument is suitable for field use and can be powered from a range of mains supplies. The maximum 60 kV output allows tests to be performed on oil from a wide variety of electrical installations including transformers, circuit breakers and other equipment. The operation of the test set is extremely simple and the results are displayed on a bright LED display. A selection of vessels allows the instrument to be configured for a variety of test standards.

The microprocessor controlled, semi automatic operation allows the user to select a choice of voltage rise rates as specified in many national standards. The start button will then initiate the test. If oil breakdown occurs the instrument will remove the test voltage and display the breakdown value. Alternatively the user can pause the test voltage at any time to carry out a withstand test. The voltage will be maintained at this level for one minute or until breakdown. After one minute the voltage will automatically continue to rise until breakdown occurs or to the maximum output of the instrument.

EV6132-009 - Spacing Gauge (0,5 mm x 6)
EV6320-232 - Accessory Pouch
Power cable
Instruction Manual

Voltage:   0 - 60 kV
Test Frequency:     61.8 Hz
Transformer Rating:     500 VA
Power Supply:     115 / 230 V, switch selectable
(99 - 132 V, 198 - 264 V)
50/60 Hz, max 80 VA
Operation:     Sime-Automatic with selectable 500 / 2000 / 3000 V/s voltage rise rate
Display:     0.0 - 60.0 kV 25 mm LED digital display 'HV On' LED
Measurement Accuracy:     2% ± 3 digits
Fuses:     250 mA (T) HRC to IEC127/5 for 220/240 V supply
500 mA (T) HRC to IEC127/5 for 110/120 V supply
Dimensions:     336 mm (H) x 400 mm (W) x 235 mm (D)
Weight:     17.5 kg
Operating Temperature:     0º C to 40º C at 80% Relative Humidity
Storage Temperature:     -30º C to 70º C at 93% Relative Humidity