- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart & Data Logger
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Current Load Bank
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
SKF TKSA31 Shaft Alignment System
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The TKSA 31 is SKF’s most affordable solution for easy laser shaft alignment. The ergonomic display unit with touch screen makes the instrument very easy to use and the built-in machine library helps storing alignment reports for multiple machines. Large sized laser detectors in the measuring heads reduce the need for pre-alignments and the embedded soft foot tool helps establish the foundation for a successful alignment. Additional functions such as live view and automatic measurement support fast and effective alignment tasks and make the TKSA 31 an innovative laser shaft alignment tool that is affordable for almost every budget.
Easy measurements can be performed by using the well-known three position measurement (9-12-3 o’clock) with additional positioning flexibility of 40° around each measurement position.
High affordability is achieved by focussing on the standard shaft alignment process and essential functions to allow quick and effective shaft alignments.
"Automatic measurement” enables hands-free measurements by detecting the position of the heads and only taking a measurement when the heads are in the right position.
Automatic reports are generated after each alignment and can be customised with notes about the application. All reports can be exported as pdf files.
Live view supports intuitive measurements and facilitates horizontal and vertical machine position corrections.
The machine library gives an overview of all machines and alignment reports. It simplifies the machine identification and improves the alignment workflow.
Technical data
Designation TKSA 31
Sensors and communication 29 mm (1.1 in.) CCD with line laser; electronic inclinometer ±0,5°;
Wired communication with USB cables (included)
System measuring distance * 0,07 to 2 m (0.23 to 6.6 ft.)
Measuring errors / displayed resolution <0,5% ±5 µm / 10 µm (0.4 mils)
Display type 5.6" colour resistive touchscreen LCD
Software update via USB stick
Shaft diameters 20 to 150 mm (0.8 to 5.9 in.) diameter
Up to 300 mm (11.8 in.) with optional extension chains
Max. recommended coupling height ** 105 mm (4.2 in.)
Mounting system 2 × V-brackets; 2 × chains 400 mm (15.8 in.); 2 × threaded rods 150 mm (5.9 in.) per V-bracket
Alignment measurement 3 position measurement 9–12–3
3 position automatic measurement 9–12–3
Alignment correction Live values for vertical and horizontal machine position correction; Laser soft foot tool
Alignment report Automatic pdf report exportable via USB stick
System battery Up to 7 hours continuous use at 100% backlight (5 000 mAh rechargeable LiPo battery)
Carrying case dimensions 530 × 110 × 360 mm (20.9 × 4.3 × 14.2 in.)
Total weight (incl. case) 4,75 kg (10.5 lb)
Operating temperature 0 to 45 °C (32 to 113 °F)
IP rating IP54
Calibration certificate Supplied with 2 years validity