HF Scientific 19554 SCM IV Streaming Current Monitor System

HF Scientific 19554 SCM IV Streaming Current Monitor System

Rp. 175,000,000
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.

The MicroTSCM Streaming Current Monitor establishes a new level of control for plant operators that depend on Streaming Current to maintain water quality. Unlike other systems, the MicroTSCM can be calibrated to a known Ion Charge unit ( ICu) value, using a cationic polymer solution. Once calibrated, the operator can use the MicroTSCM to determine the control set-point for the plant. This set-point is established through optimization and it reflects the actual ICu of the sample stream.

Establishing an actual ICu value for the control set-point ensures the operator can always return to the same conditions in the event of a plant upset, equipment failure, or shut down. Routine calibration ensures that the integrity of the output can be maintained by compensating for standard wear-and-tear on the probe and electronics.

The graphical display of the MicroTSCM monitor provides the operator a fast and easy way to keep up with what is going on inside the plant. Historical trending of readings over the previous 8 or 24-hour period is continuously displayed as a graph on the screen.

The sensor design incorporated into the MicroTSCM was developed to operate under the most turbid conditions. The HF MicroTSCM monitor, coupled with leading-edge sensor technology provides an easy-to-use tool for precise control over your chemical dosing system.

Range     ± 10.00 ICu ( SCU) 
Resolution     0.01 ICu ( SCU) 
Accuracy     ± 1% of full scale
Response time     1 second
Alarms     2 settable Hi/ Lo/ Off
1 system alarm
1 flow alarm ( requires optional hardware) 
Average time     User selectable
Analog output     4-20 mA
0 to 10 VDC
Digital outputs ( optional) RS-232 serial
RS-485 serial
Display     Graphical trending and numeric
Sensor probe     Submersible to a depth of 120mm up to 6 to 10 liters per minute flow rate required
Wetted materials     HPDE, PTFE, Stainless steel, Neoprene, ABS