- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart & Data Logger
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Current Load Bank
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Test Analyzer
- Oscilloscope
- Other Products
- PH Meter
- Pipe Cable Locator
- Power and Voltage
- Power Quality Meter
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
MITECH MH600 Portable Hardness Tester
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Product Description
The new MH600 portable hardness tester from Mitech utilises the leeb hardness testing theory to test a wide range of materials. It is compatible with 7 different types of impact devices, and can automatically detect and identify the impact device without the need to re-calibrate the device. It will also automatically check the impact device connection status and direction (except for G impact device) and can support 360 degree measurements.
It has a full colour LCD 320 x 240 dot matrix screen with adjustable brightness for use in all environmental conditions. The user can perform basic single-point calibration or multi-point calibration, which can be used to convert curve to reduce measurement error. It also has integrated leeb hardness conversion function, converting between HLD and HLC, HLG, HLDL, HLD + 15 for ease of calibration and test result conversion.
Specifications:
Measuring Range: HLD (170 ~ 960).
Measuring Direction: 360 Degrees (detected automatically).
Materials: steel, cast steel, cold work tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminium alloys, brass (copper-zinc alloys), bronze (copper-aluminium/tin alloys), pure copper, wrought copper.
Hardness Scales: HL, HB, HRB, HRC, HRA, HV, HS.
Display:16 bits full digital colour TFT 320 x 240 dot matrix.
LCD Data Memory: 500 groups maximum (relative to impact times 32~1).
Working Voltage: 3V (2 x AA alkaline batteries).
Continuous Working Period: approximately 100 hours (at default brightness).
Communication Interface: USB 1.1.
Complette Package
1 x Main Unit
1 x D Type Impact Device
1 x Standard Leeb Hardness Test Block D
1 x Nylon Brush A
1 x Small Support Ring
2 x AA Alkaline Batteries
1 x Operation Manual
1 x ABS Carrying Case
1 x Data-pro Software
1 x USB Communication Cable (Mini USB-B to USB-A)