- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart & Data Logger
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Current Load Bank
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Test Analyzer
- Oscilloscope
- Other Products
- PH Meter
- Pipe Cable Locator
- Power and Voltage
- Power Quality Meter
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Spectrum Analyzer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
KANOMAX Dif-Kit Fume Hood Test Station
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Kanomax Dif-Kit Fume Hood Test Station is designed to eliminate or minimize exposure to hazardous fumes, dust or other airborne particulates. Basically, the fume hood provides an area where a technician can safely work with certain hazardous materials. The fume hood is designed to contain and vent all dangerous vapors and particulates away from the worker. A typical fume hood will undergo quality testing by the manufacturer, but it is also necessary to test the fume hood in its installed state and to periodically make sure the hood is performing correctly to limit human exposure to airborne hazards. ASHRAE 110-1995 is the current industry accepted standard for this testing procedure.
The ANSI/ASHRAE 110 test is a method of testing the performance of laboratory fume hoods. Kanomax Dif-Kit tracer gas hardware is ideal for use in performing the Tracer Gas test in accordance with ANSI/ASHRAE Standard 110-1995. The diffuser is made to the design and specifications.
Features:
Diffuser is made to the design and specifications of Standard drawing #110-83M
The internal critical orifice ensures a flow rate of 4 liters per minute. Other orifice sizes can be inserted
Alternative tracer gas systems are available – SF6, NO2, or FM-200 (HFC-227)
Thermal anemometer for face velocity testing
Commercial fog machine for flow visualization
What's In The Box:
(1) Tracer gas diffuser
(1) Nozzle assembly
(1) In-line flow meter
(1) Tank regulator
(1) 20 ft of tubing