BK Precision 2555 Digital Storage Oscilloscope

BK Precision 2555 Digital Storage Oscilloscope

Rp. 45,000,000
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.

100 MHz bandwidth, 2 GSa/s sample rate
Large 7" widescreen color display
32 automatic measurements
FFT plus four additional math functions - Add, Subtract, Multiply, and Divide
Built-in context sensitive help system
50 Ω input coupling
PC software that lets you remotely control the oscilloscope and capture, save, and analyze waveform data
Front and rear panel USB host port for convenient storing and recalling of waveform data, setups, and screenshots on a USB flash drive
Standard LAN (supports SCPI) and USB device port (USBTMC compliant) for remote PC control
Advanced tools include digital filters with adjustable limits, pass/fail testing and waveform recorder mode
Multi language user interface and context sensitive help

The BK Precision 2555 100 MHz, 2 GSa/s, 4 Ch Digital Storage Oscilloscope provides high performance and value in 4-channel configuration. With bandwidth 100 MHz and 2 GSa/s sample rates, this oscilloscopes offer 24 kpts/Ch waveform memory, 32 automatic measurements, and advanced triggering capabilities including math functions. Engineered to allow you to see more of your signal under test, the 2555’s widescreen 7” TFT display offers a significantly larger viewing area than typical economy oscilloscopes (5.7”).

Maximize productivity with PC connectivity via LAN and USB. The downloadable Easy Scope PC software lets you easily capture, save, and analyze measurement results. All oscilloscope parameters can be controlled via a PC without the need for programming.

Educators who want to teach waveform measurement fundamentals can benefit from the ability to disable the Auto set button, a function that automatically sets up the scope to display a signal.

The BK Precision 2555 100 MHz, 2 GSa/s, 4 Ch Digital Storage Oscilloscope is ideal for applications in design and debug, service and repair, and education.

150 MHz 10:1 Probe Set (4 pc)
Power Cord
USB (Type A to B) communication interface cable
Certificate of Calibration
User Manual

Performance Characteristics
Bandwidth: 100 MHz
Real Time Sampling Rate: 2 GSa/s
Display: 7 in. Color TFT, 480 x 234 resolution, 64K color
Channels:  4
Rise Time:  < 3.5 ns
Ch to Ch Isolation  (Both channels in same V/div setting): >100:1 at 50 MHz
Max Memory Depth:  24 kpts
Vertical Resolution:  8 bit
Vertical Sensitivity:  2 mV/div -10 V/div (1-2-5 order)
DC Gain Accuracy:  <±3.0%: 5 mV/div to 5 V/div in fixed gain ranges <±4.0%: 2 mV/div in variable gain ranges
Maximum Input Voltage:  400 V (DC+AC PK-PK, 1 MΩ input impedance, X10),
CAT I, 5 Vrms (50 Ωinput impedance) Position Range:  2 mV–100 mV: ±800 mV; 102 mV – 5 V: ±40 V
Bandwidth Limit:   20 MHz ±40% (Note: BW limited below 20 MHz when using probe in X1)
Horizontal Scan Range:  2.5 ns/div – 50 s/div
Timebase Accuracy:   ±100 ppm measured over 1 ms interval
Input Coupling:  AC, DC, GND
Input Impedance:  3 pF ± 3 pF
Vertical and Horizontal Zoom:  Vertically or horizontally expand or compress a live or stopped waveform
Reading Resolution:   6 digits
Waveform Math Operation:  Add, Subtract, Multiply, Divide, FFT
Cursors Types:  Voltage, Time
Power Requirements:  100-240 VAC, CAT II, 50 VA max, 45 Hz to 440 Hz