IDEAL Networks R156003 SignalTEK NT Cable Transmission Tester

IDEAL Networks R156003 SignalTEK NT Cable Transmission Tester

Rp. 65,000,000
NOTE
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.

The IDEAL Networks R156003 SignalTEK NT 1GB Network Cable Transmission Tester tests the performance of voice, data, video and CCTV applications on 10/100/1000 Mb/s Ethernet networks; it issues a report to prove installed data cables or networks can carry Ethernet traffic at full speed, without packet errors.
The R156003 utilizes a method known as transmission testing to prove the performance of a network by sending real Ethernet data frames through the cabling and/or network devices, then comparing the received data with the transmitted data to determine the error rate. This network "stress test" method generates reports of real-world 1000Base-T performance to the IEEE 802.3ab gigabit Ethernet standard. When connected to an active network, the SignalTEK NT also uses CDP and LLDP to display the MAC address.
Note: IDEAL AnyWARE is a free app for iOS and Android devices that wirelessly connects to the R156003 SignalTEK NT allowing users to transfer PDF & CSV test reports or individual test results to the mobile device. Once on the device the reports can be sent to colleagues via email or cloud based file sharing services.

Product Features:
Test network traffic performance on copper and fibre to IEEE802.3ab standards
Wiremap test for opens, shorts, miswires, and split pairs to TIA-568 standards
Gigabit link verification for copper and fibre cabling
Test Network loads through switches to simulate CCTV/IPTV/VoIP/Web traffic
PoE/PoE+ verification that displays available voltage at device location
Check Ethernet connectivity at device location to 10/100/1000 Mb/s
Verify network configuration (device IP/gateway address/subnet mask)
Switch port identifications via LLDP/CDP protocols
Measure distance to fault using TDR technology (copper only)
Identify and trace cables w/compatible amplifier probes
Optical power indication (w/compatible SFP modules)
Stress test networks before installing bandwidth-intensive devices
Port blink to visually trace cable from work area outlet to network switch
Displays port ID of LLDP/CDP enabled switches to eliminate manual cable tracing
Identify network connection problems, such as hardware, network, or configuration faults
Ping local network devices and Internet URL’s
Count number of hops between network points w/traceroute testing
PoE load tests confirm available power meets PoE device requirements

Complette Package:
1 - SignalTEK NT Display Unit
1 - Remote
2 - NiMH Batteries
2 - 30cm Cat 5e STP Patch Cables
2 - Power Supplies w/EU/UK/US Adapters
1 - USB Wi-Fi Adapter
1 - User Manual
1 - Carry Case