- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart & Data Logger
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Current Load Bank
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Test Analyzer
- Oscilloscope
- Other Products
- PH Meter
- Pipe Cable Locator
- Power and Voltage
- Power Quality Meter
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Spectrum Analyzer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
MEGGER DLRO10HDX Digital Low Resistance Ohmmeter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Megger DLRO-10HDX-DH4C (1008-075) Digital Low Resistance Ohmmeter provides memory storage as well as the ultimate simplicity of operation with a rugged IP65 case designed for stable ground and bench operation.
The DLRO-10HDX-DH4C is powered from either a rechargeable battery or AC power, making it suitable for continuous testing in production line/repetitive use environments.
Rotary switch controls are simple and easy to operate in all weather conditions and with gloved hands. A large, clear, backlit LCD display is easy to read from a distance. The DLRO-10HDX-DH4C provides significantly enhanced compliance and is capable of delivering 10 A into measurements up to 250 milliohms and 1 A into measurements up to 2.5 ohms. The duration of each test may be up to 60 seconds. The DLRO-10HDX-DH4C is rated CAT III 300 V when the optional terminal cover (sold separately) is fitted to the instrument.
The DLRO-10HDX-DH4C provides five test modes each of which is selected through a simple rotary control on the Mode selection rotary switch. All memory functions, delete, download to PowerDB and recalling test results are also accessible via the Range Selection rotary switch.
A simple control panel enables easy navigation for configuration settings.
The DLRO-10HDX-DH4C is supplied with the DH4-C 1.5m Duplex Connect Handspike Lead Set, which features terminations that may easily be changed as required.
Features:
Supplied with two wire, four terminal duplex probe lead set
Simple push and twist for quick change of terminations
Onboard memory for test results stores up to 200 records
High or low output power selection for condition diagnosis
Simple rotary switch selection of five test modes, including auto start on connection
Operates from rechargeable battery or line power supply, allowing for continuous use
Protected to 600 V without blowing a fuse
Removable lid facilitates easy test lead connection
Delivers 10 A into measurements up to 250 milliohms and 1 A into measurements up to 2.5 ohms
Capable of performing tests lasting up to 60 seconds
IP 54 operational ingress protection ensures protection from the elements (battery power only)
Rugged case provides protection up to IP 65 with lid closed
Interchangeable test lead terminations
7Ah lead acid battery provides extended operation, completing up to 1000 Auto (3 sec) tests
Large, easy to read LCD display with backlight and contrast adjustment
Auto power off function conserves battery
What's In The Box:
(1) DLRO10HDX-HS1 Digital Low Resistance Ohmmeter (1008-075)
(2) DP1-C Duplex Probe (1006-450)
(1) TL1.5-C Connect Lead, 1.5 m (1006-452)
(1) TL1.5-CL Connect Lead with Indicator Lights, 1.5 m (1006-456)
(1) Test Lead Pouch, Lid-Mounted (1005-623)
(1) User Guide CD