- Air Quality Meter
- Battery Analyzer
- Calibrator Tester
- Chart Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current Load Bank
- Current Meter
- Data Logger
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Fire Protection
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Oil
- Light Meter
- Mass Flow Meter
- Metal Detector
- Networks Analyzer
- Ohm Meter
- Oil Test Analyzer
- Other Products
- PH Meter
- Pipe Cable Locator
- Power and Voltage
- Power Quality Meter
- Power Source
- Pressure Gauge
- Shaft Alignment
- Sound Level Meter
- Spectrum Analyzer
- Temp. Calibrator
- Thermal Imager
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
MEGGER 220070 70KV DC Dielectric Test Set
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The Megger 220070-47 high voltage DC dielectric test set provides the most dependable, portable dc high voltage sources for checking the quality of electrical power cables, motors, switchgear, insulators, transformers and capacitors. The portable set is comprised of two separate modules:
This module allows the operator to switch-select the appropriate current output range, adjust the output level and monitor both the applied voltage and leakage current at a safe distance from the high voltage being delivered to the load under test. No voltage higher than input ac power is present in the control module.
An air-insulated design receives its instructions from the control unit. It generates the dc high voltage that is delivered to the load under test. Although a different control module is used with each of the three models, they are all the same size and weight. Each high-voltage module is a different size and weight to accommodate the rated output voltage.
Time-varying tests such as the polarisation index test (PI test) are independent of temperature effects and save time. To perform this test, a predetermined test voltage is applied to the unit under test and readings are taken at 1 minute and 10 minutes. The resulting ratio is analysed to determine insulation quality. This type of test is especially appropriate for high-capacitance samples.
The step-voltage test is independent of temperature effects and saves time. To perform this test, the output voltage is increased in even steps at regular intervals over a fixed period of time. As long as the resistance of the unit under test increases with time, it has high-quality insulation. This type of test is only useful for high-capacitance samples.
Operates Like a Full-Wave Rectified Unit (Filtered Half-Wave Rectification)
Provides the advanced performance equal to a full-wave rectified unit.
Allows for a simple circuit scheme for long-term reliability.
Lightweight High-Voltage Module
Air insulated, it is the lightest weight module available for its voltage and power ratings.
Convenient portability allows a single operator to transport it into the field.
Complete Internal Guard Circuit/Guard Connection on High-Voltage Output Cable
Intercepts stray surface leakage currents which could interfere with the measurement.
Eliminates the need for an extra lead to hook up the guard connection.
Ensures highly accurate measurements.
Choice of Digital or Analog Metering
The preferred medium may be selected by the user.
Continuously Variable Test Voltage
User can set test voltage to intermediate values as required.
Fast Charging of High-Capacitance Samples
Saves the operator test time.
Negative Polarity to Ground
Applies a worst-case condition to assure reliability.
Strip Chart Recorder (Optionally Available)
Provides a permanent record of the leakage current for the unit under test.
Standard Safety Features
Bipolar ammeter that displays the magnitude of the discharge current from the unit under test (digital models only)
Input-supply-line circuit breaker
Output current overload relay
Zero-start interlock for high-voltage output
Pushbutton controls and indicating lights for high-voltage ON/OFF
Full circuit-breaker protection against internal damage by overloads, surges or test sample breakdown
Connection for external permissive and safety interlocksModel Capabilities/Applications
70-kV DC Dielectric Test Set
Acceptance testing on 15 kV class cable
Maintenance testing on 28 kV class cable
What's In The Box:
(1) Input supply cord, three-wire, 8 ft (2.4 m)
(1) Ground cables, 15 ft (4.5 m) 
(1) Interconnection cable, 15 ft (4.5 m)
(1) Detachable HV output cable, for 70 kV test sets,15 ft (4.5 m)
(1) Detachable HV output cable, for 120 and 160 kV test sets, 15 ft (4.5 m)
(1) Carrying bag for cables
(1) Kilovolt/megohm test record graph paper (100-sheet pad).