- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart & Data Logger
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Current Load Bank
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Test Analyzer
- Oscilloscope
- Other Products
- PH Meter
- Pipe Cable Locator
- Power and Voltage
- Power Quality Meter
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Spectrum Analyzer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
PHASE II+ PHT3300 Ultrasonic Hardness Tester
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The PHASE II portable hardness tester, Model No. PHT-3300 is an advanced integrated portable hardness tester distinguished by its very compact size, high accuracy, wide measuring range and simplicity of operation. It is suitable for testing the hardness of all metals and widely applied in many areas of industry.
The PHT-3300 portable hardness tester combines the universal impact device D and a data processor in a single unit. It automatically computes all Vickers, Brinell, Rockwell and Shore hardness values. USB output enables this new model to print any of it’s memory from up to 500 groups. The impact direction can be set so that the accurate values can be achieved at any angle, even upside down! Statistical mean value is automatically provided.
The measuring method of the PHT-3300 portable hardness tester is defined as “the quotient of the impact body’s rebound velocity over its impact velocity”. Optional accessories include various support rings to meet the requirements of specialized convex or concave applications.
The PHT-3300 as with all dynamic portable hardness testers, is designed to test very large hard parts. Steel should be close to 1” thick of solid material. Softer metals need even more mass.
Features
Large screen LCD, showing all functions and parameters. Test at any angle, even upside down.
Direct conversion display of hardness scales HRB, HRC, HRA, HV, HB, HS, HL.
Large memory could store 100 groups (Relative to average test times 32～1) Information including single measured value, mean value, impact direction, impact times, material and hardness scale can be displayed.
Battery information showing the current capacity of the battery and the charge status.
User calibration function.
Software to connect to PC via USB port.
Li‐Ion rechargeable battery power supply.
Continuous working period of no less than 200 hours.
Auto power off to save energy.
Outline dimensions：148mm×33mm×28mm
Specification
Dimensions: 6.10” x 2.36” x 1.49” (155 X 60 X 38mm)
Impact Device: D
Impact Energy: 8 Ft-Lbs (11nmm)
Test Tip: Tungsten Carbide
Measuring Accuracy: +- 0.8% (Corresponding To +- 1 Hrc At Hrc=58)
Max. Hardness Of Sample: 980hv
Weight: 0.48lb (220g)
Impact Direction: Any Angle
Operating Temperature: 32 To 122 Degrees F (0 To 50 Degrees C.)
Min. Weight Of Sample: 11 lbs / 5kg
Min. Radius Of Curved Surface: 1.2in (30mm) (With Support Rings:11mm)
Power Supply: 3.6V Lithium Rechargeable Battery
Data memory: Up to 500 Groups
Output: USB 1.1
Complete with a Calibrated Test Block, USB cable and Software, Rugged Carry Case and Operation Manual.