- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart & Data Logger
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Current Load Bank
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Test Analyzer
- Oscilloscope
- Other Products
- PH Meter
- Pipe Cable Locator
- Power and Voltage
- Power Quality Meter
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Spectrum Analyzer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
SKF 729124 Hydraulic Pump
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The 729124 has a maximum pressure of 100 MPa (14 500 psi) and delivers a volume per stroke of 0,5 cm3 (0.03 in3 ). The pump is suitable for SKF hydraulic nuts (≤ HMV 54), and for mounting or dismounting bearings or components with an interference it applying the SKF Oil Injection Method, where a maximum pressure of 100 MPa is required. The pump is supplied with a 1,5 metre long, high pressure hose with quick connection coupling. Mating quick connection nipple for attachment to the workpiece is included. The pump is illed with SKF mounting luid LHMF 300 and comes with an additional 1 litre can with the same luid. Everything is packed in a sturdy plastic case. The pump has an overpressure valve and a pressure gauge. The release valve is an integrated part of the pump head.
Features:
Oil container capacity 250 cm³ (15 in.³)
Suitable for hydraulic nuts smaller than or equal to HMV 54E
Extra litre of mounting fluid
Special pump configurations available
Packed in a sturdy protective case
What's In The Box:
(1) SKF 729124 Hydraulic Pump 100 MPa - (14 500 psi)
(1) Instruction manual