- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart & Data Logger
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Current Load Bank
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Test Analyzer
- Oscilloscope
- Other Products
- PH Meter
- Pipe Cable Locator
- Power and Voltage
- Power Quality Meter
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Spectrum Analyzer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
TROTEC BG20 Carbon Monoxide Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The hand-held device is ready for operation within seconds of having been switched on and can detect CO concentrations ranging from 0 – 1,000 ppm quickly and reliably.
These values, which can be determined exactly to within ± 10 ppm, are then presented as clearly visible figures on a large, backlit display. As many as 10 metered values can be stored directly in the BG20’s onboard memory.
Even critical levels can be checked quickly and easily thanks to the integrated alarm function. If the values exceed 35 ppm, then the measuring device warns the user automatically via an acoustic warning tone which sounds at increasingly short intervals the higher the concentration gets, before developing into a permanent warning tone as soon as a value of 200 ppm is exceeded.
Thanks to the auto power off, which switches off the device after more than 15 minutes of inactivity, flat batteries are now a thing of the past. The clearly arranged function keys allow the device to be used single-handedly.
Features and Benefits of the BG20 carbon monoxide meter:
Measuring range: 0 – 1,000 ppm
Resolution: 1 ppm
Accuracy: ±5 % or ±10 ppm
Type of sensor: stabilised electrochemical gas specific (CO)
Warm-up phase: < 20 seconds
Functions: maximum value, hold function, backlit display, alarm function, auto power off, internal memory for up 10 measurement values
Operating conditions: 0 °C to 50 °C, 0 % to 99 % RH (non-condensing)
Dimensions (L x W x H): 160 x 56 x 40 mm
Weight: 180 g