- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
HIOKI BT3563 6V/60V/300V Battery HiTester
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Features:
High-voltage battery pack testing up to 300V
Ideal for high-precision cell voltage measurements (accurate to 0.01% of reading)
Ranges from 3 mΩ to 3000 Ω support coin-size to large-cell batteries
Battery module testing
Measurement circuitry employs enhanced current regulation
Fast 10 ms response and 8 ms sampling time for high-speed measurements
Large (low-resistance) cell testing
High-speed mass production testing of coin batteries
Fuel cell stack measurements
Battery research and development measurement applications
Choice of PC interfaces for full remote operation
The Hioki BT3563 6V/60V/300V Battery HiTester support simultaneous high-speed measurement of internal resistance (IR) and battery voltage (OCV) for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications.
Specifications:
Measurement types: Resistance and voltage
Resistance measurement method: Four-terminal AC (1-kHz) method
Rated voltage: ±300V DC rated input voltage; ±300V DC maximum rated voltage to ground
Input resistance: 3mΩ/30mΩ/300mΩ ranges: Approx.90k; Ω3Ω/30Ω/300Ω/3000Ω ranges: Approx.1MΩ
Sampling rate: Four steps – Extra Fast, Fast, Medium or Slow
Response time: Approx. 10 ms for measurements. Note: Response time depends on reference values and the measurement object.
Total measurement time: Sampling time + Response time
Zero-adjustment: 1000-count range (both resistance and voltage)
Triggering: Internal or external
Delay time: On/off, 0 to 9.999 seconds
Averaging samples: On/off, 2 to 16 samples
Statistical calculations: Total data count; valid data count; maximum, minimum and average values; standard deviation; population standard deviation and process capability indices
Measurement value output function: Measurement values are output via RS-232C upon trigger input
Measurement value memory: Up to 400 measurements
Panel save/load: Up to 126 configuration settings
Save Frequently Used Settings in Memory: Measurement function, resistance measurement range, auto-range setting, zero-adjust setting data, sampling rate, trigger source, delay setting, averaging and comparator settings, statistical calculation setting, display switching and key-lock.
Analog Output : Measured resistance (displayed value, from 0 to 3.1 V DC)
External interface: External I/O, RS232C (9600, 19200 or 38400 bps), Printer RS-232C, GP-IB available on BT3562-01
Other functions: Over-range display, measurement error detection, self-calibration, dual comparators, key-lock