HIOKI BT3562 6V/60V Battery HiTester

Features:
High-voltage battery pack testing up to 60V
Ideal for high-precision cell voltage measurements (accurate to 0.01% of reading)
Ranges from 3 mΩ to 3000 Ω support coin-size to large-cell batteries
Battery module testing
Measurement circuitry employs enhanced current regulation
Fast 10 ms response and 8 ms sampling time for high-speed measurements
Large (low-resistance) cell testing
High-speed mass production testing of coin batteries
Fuel cell stack measurements
Battery research and development measurement applications
Choice of PC interfaces for full remote operation

The Hioki BT3562 6V/60V Battery HiTesters support simultaneous high-speed measurement of internal resistance (IR) and battery voltage (OCV) for the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries, and other battery packs for high voltage applications.

The Hioki  BT3562-01 provide analog output of resistance measurement values. This is convenient for combining re-corded data from multiple locations or of various data types, such as for logging long-term measurements and for fuel cell evaluation.

Specifications:
Measurement types: Resistance and voltage
Resistance measurement method: Four-terminal AC (1-kHz) method
Rated voltage: ±60V DC rated input voltage;  ±70V DC maximum rated voltage to ground
Input resistance:  3mΩ/30mΩ/300mΩ ranges: Approx.90k;  Ω3Ω/30Ω/300Ω/3000Ω ranges: Approx.1MΩ
Sampling rate:  Four steps – Extra Fast, Fast, Medium or Slow
Response time:  Approx. 10 ms for measurements . Note: Response time depends on reference values and the measurement object.
Total measurement time:  Sampling time + Response time
Zero-adjustment: 1000-count range (both resistance and voltage)
Triggering:  Internal or external
Delay time: On/off, 0 to 9.999 seconds
Averaging samples: On/off, 2 to 16 samples
Statistical calculations:Total data count; valid data count; maximum, minimum and average values; standard deviation; population standard deviation and process capability indices
Measurement value output function: Measurement values are output via RS-232C upon trigger input
Measurement value memory: Up to 400 measurements
Panel save/load:  Up to 126 configuration settings;  Save Frequently Used Settings in Memory: Measurement function, resistance measurement range, auto-range setting, zero-adjust setting data, sampling rate, trigger source, delay setting, averaging and comparator settings, statistical calculation setting, display switching and key-lock.
Analog Output:  Measured resistance (displayed value, from 0 to 3.1 V DC)
External interface:  External I/O, RS232C (9600, 19200 or 38400 bps), Printer RS-232C, GP-IB available on BT3562-01
Other functions: Over-range display, measurement error detection, self-calibration, dual comparators, key-lock.