- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart & Data Logger
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Current Load Bank
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Test Analyzer
- Oscilloscope
- Other Products
- PH Meter
- Pipe Cable Locator
- Power and Voltage
- Power Quality Meter
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Spectrum Analyzer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
TSI ALNOR 5725 VelociCalc Rotating Vane Anemometer
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The TSI Alnor VelociCalc 5725 rotating vane anemometer is a high performance, yet simple to use, rotating vane anemometer. High accuracy and reliability make the VelociCalc 5725 the professional's ideal tool for measuring unevenly distributed or fluctuating flows through heating and cooling coils, diffusers, grilles and filters. With accuracies of ±1.0% (velocity) and ±2.0°F (temperature), the VelociCalc 5725 measures offers wide measurements ranges of 50 to 6,000 ft/min for velocity and 32 to 140°F for temperature.
While accurately measuring air velocity and temperature, TSI Alnor VelociCalc 5725 rotating vane anemometers also calculate flow rate, perform averaging, and can determine minimum and maximum readings. Using sweep mode you can quickly provide one averaged reading of velocity or volume over a large measurement area. The large vane head automatically averages velocity and volume readings. The VelociCalc 5725 includes variable time constant, sampling and statistics functions and data logging capability for 12,700+ samples.
The TSI Alnor VelociCalc 5725 rotating vane anemometer ships complete with a 4-inch (100 mm) vane, carrying case, alkaline batteries, operation and service manual, USB cable with LogDat2 downloading software and calibration certificate.
Features
Velocity
Range: 50 to 6,000 ft/min
Accuracy: ±1.0% of rdg ±4 ft/min
Duct Size Range: 0 to 173.6 ft2
Temperature
Range: 32 to 140°F
Accuracy: ±2.0°F
Resolution: 0.1°F
Calculates flow rate, performs averaging, and can determine minimum and maximum readings
NIST Certificate Included
Data Storage: 12,700+ samples and 100 test IDs
Logging Interval: 1 second to 1 hour
Time Constant: User-selectable