- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
TECHNO-AC Success TG-435.15E Water Leak and Cable Pipe Locator
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Based on receiver AP-027, EMD-247 sensor, acoustic sensor AD-227, tracing transmitter AG-105.
Features:
High precision location of underground utilities up to 6 m
Acoustic cable fault detection
Distance of tracing is 3 km from the place of transmitter connection
Detection of insulation deterioration on cables by non-contact methods: sharp decreasing of the signal level,
by using the sensor DODK (extra tool), the phase "double-frequency" method "Δφ" and the amplitude of
"double-frequency" the method of "ΔA"
Detection of insulation deterioration on cables by contact method: Sensor DKI (extra tool)
Brief description:
Receiver frequencies: 50(60) Hz / 100(120) Hz / 512 Hz / 1024 Hz / 8192 Hz / 33 kHz
Passive receiver frequencies: power cable detection, BB mode
Storage of 31 signal level with a graph displayed
Visual indication of the signal on the display: scale, graph and spectrum
Graphic visualization (moving chart) of sequence of measurements, max and min signal levels
Sound indication
Choice of bandwidth
Two-segment indication of frequency spectrum (and “filtered”) signal
Light weight
Comfortable to wear for long terms
LCD display
Transmitter frequencies: 0.5 / 1.0 / 8.2 / 33 kHz
Transmitter 20W
Distance of tracing is 3 km from the place of transmitter connection
Application:
Cable fault location by electromagnetic and acoustic methods (with high-voltage pulse transmitter,
which is not included into the set)
Detection of insulation deterioration on cables by contact and non-contact methods
Detection of cables up to 6 m depth
Detection of metal pipelines up to 6 m depth
Survey the ground before the ground works
“Broadband” mode
Distance of tracing from the place of transmitter connection is up to 3 km
Indirect measurement of the depth
What's In The Box:
(1) Receiver AP-027
(1) Acoustic sensor AD-227
(1) Carrying rod for AD-227
(1) Extension carrying rod for AD-227
(1) Contact rods for AD-227
(1) Magnet for AD-227
(1) Electromagnetic sensor EMD-247
(1)Transmitter АG-105
(1) Headphones
(1) Grounding rod
(1) Cables and accessories
(1) Holder for AP-027
(1) Contact magnetic
(1) EMD carrying bag
(1) Set carrying bag
(1) Manual and passport