ADDITEL ADT672-05 Series Digital Pressure Calibrators

ADDITEL ADT672-05 Series Digital Pressure Calibrators

Rp. 58,500,000
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.

With advanced microprocessor technology and state-of-the-art silicon pressure sensors, the Additel ADT 672 series of precision digital pressure calibrators provide a pressure calibration solution for gauges, transmitters, and switches in a wide pressure range. The Additel ADT672 digital pressure calibrators is a very portable decive and cannot only measure pressure precisely with a built-in pressure sensor, but can also read the current or mV produced by the transducer, and can even supply an excitation voltage to power sensors or transmitters during calibration. In order to reach 0.025% F.S. accuracy over ranges to 10,000 psi (700 bar) and 0.1% F. S. accuracy over range to 36,000 psi (2,500 bar), every silicon pressure sensor in our gauges has been specially aged, tested and screened before assembly. The Additel ADT 672 series precision pressure calibrators are unmatched in performance and reliability.

Pressure ranges to 36,000 psi (2500 bar)
Pressure measurement uncertainty: ADT 672-02: 0.025%FS; ADT 672-05: 0.05%FS
Hart Communication capability
Measure mA or V, and with 24V loop power and 0.02% RD + 0.003%FS accuracy
Power transmitters during test using 24V loop supply
Pressure switch test
Hart Communication capability
Advanced temperature compensation
Dual readout
Min/Max/Hold to capture changing measurements
Data logging
Large, easy to read display with 6-digit resolution
Back lighted display
Rechargeable battery or AC adapter
NIST traceable calibration with data(included)
Easy-to-use, inexpensive pressure calibrator with uncertainty better than 0.025%FS

Applications: Gauge calibration; Precision pressure measurement; Pressure transmitters calibration; Pressure switch testing; Safety relief valve resting; Pressure regulator testing; Hydraulic leak testing

What's in the Box:
(1) 110V/220V external power adapter (DC 10V)
(2) 1.5-meter test leads
(2) 0.156 inch (Ø4 mm) test hose (for differential pressure gauge only)
(1)  Additel/Land software
(1) Instruction Manual
(1) NIST traceable calibration certificate