- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
RAYTECH TR-1P 1-Phase Turns Ratio Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Raytech Single Phase Transformer Turns Ratio Meter (TR-1 & TR-1P) was designed to be a rugged and reliable automatic transformer Ratiometer. This system has a high degree of accuracy and will test ratios to 4000:1. The design of this test system is based upon the popular Raytech Automatic Three Phase test set: TR-Mark II.
The TR-1 & TR-1P are a completely new approach in technology. Raytech is an innovative, research and development company. Many hours of research and development enhance the reliability and precision of this test set. To set this instrument apart from the standard test sets on the market we have added a graphical display and a sensing circuit that can indicate when a transformer is connected to the test leads automatically.
The TR-1 & TR-1P are high precision, fully automatic, microprocessor based, Single Phase Transformer Turns Ratio Test systems. This system is designed for highly accurate readings on-site with laboratory precision.
The TR-1 & TR-1P applies a preset voltage of 40, 10 or 0.25 to 5 (CT-Mode) vac (60Hz) on the HIGH winding side of the transformer and measures back through the LOW side of the transformer. The results are reported on the easy to read liquid crystal display.
The TR-1 & TR-1P are lightweight systems that come complete its own rugged waterproof fieldcase.
There is No maintenance required. There is No calibration procedure (No potentiometers to turn). This is due to the utilization of high precision components in the design.
Turns Ratio Meter 1 Phase with Printer
TR-1P Turns Ratio Meter 1 Phase with Printer
System is housed in a rugged, lightweight, waterproof case
Rechargeable battery operated instrument
Can be recharged with line voltage, or optional DC Car adapter
Reverse Polarity Test
Continuity Test
Test current up to 1 A for CT testing
Fully automatic, continuous operation system
Internal storage of the last 50 test results
RS-232 interface (optional)
Pass / Fail Function
Save up to 16 Transformers for comparison
Over 1000 measurements without recharging
2 Year standard warranty
In The Box:
H and X Lead Set – 5m (16ft.)
Power Cord – 2.4m (8ft.)
Ground Lead – 5m (16ft.)
Cable Bag with Shoulder Strap
Paper Refill for Printer, 5 Rolls
Instruction Manual
Certificate of Accuracy (Calibration)