- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
RAYTECH WR14 Winding Resistance Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Raytech's Digital Winding Resistance meter WR14 is the battery powered version winding resistance system with a most advanced demagnetizing circuit. It is designed for high degree of accuracy measurement of very low resistance of any inductive loads.
Unique Measuring Technique: This newly designed technique of measurement incorporates a high precision measurement circuit, a unique power source and the fastest discharge unit on the market.
The WR-14 apply a preset current level, selected by the user from 0.025A to 15A .
The results are reported on the easy-to-read color LCD display and can be stored or printed.
WR14 is a lightweight system designed with its own rugged waterproof field case.
Advanced Protection: Upon powering on the system initializes itself with a self-calibrating, circuit checking sequence. If any problem is detected during this initialization period, or during operation, immediately the operator will be notified.
Features:
Battery operated
High power DC supply (15A / 30V)
Charge inductive loads up to 1500 Henry
2 independent measuring channels
Highest Accuracy and Precision of any high current test system
Automatic measurements of Low Resistance from 0.00µΩ ...100kΩ
Demagnetizing Circuit (Advanced design)
Microprocessor based system with internal storage for over 10000 test results
Data exchange via USB-Key or USB / RS232 Connection
Storage and Printing of test results
Complete automatic calibration system and system diagnostics
Temperature channels with automatic resistance correction
Standard USB 2.0 & RS232 (serial) Interface
Pure filtered DC Power source for the highest accuracy readings
Color LCD with backlighting and touch screen
Panel mounted Emergency Stop Switch
Mounted in rugged case for field testing
Fully automatic cooling curve analysis (option AHRT 01)
Fast discharge unit
Discharge indicator - visible and audible indicator for discharge status
2 Year standard warranty
What's in the Box:
(2) 5m Current Cables
(2) 5m Potential Cables CH 1
(2) 5m Potential Cables CH 2
(1) 5m Jumper Cable
(1) Cable Bag
(1) Power Cord depending on country of distribution
(2) Paper Rolls
(1) USB Memory Stick
(1) Instruction Manual