- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
T&R 200ADM-P Current Injection System
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The T&R 200ADM-P is a flexible current injection system capable of supplying currents of up to 200A AC into a variety of loads. The unit is designed for testing devices used for power system protection, but can be used wherever a high current AC source is required. The outputs may also be used in voltage mode to supply voltages of up to 240Vac.
An auxiliary metering input is available, allowing the measurement of voltage, current, frequency, phase, and harmonics. In conjunction with the main current output this can also measure power and impedance. Test results from the unit may be stored to a USB memory key and comments entered against the results using a USB keyboard.
0-200A output current.
True RMS metering with 1 cycle capture.
Variable auxiliary ac voltage/ current output with phase shift.
Auxiliary metering input V, f, Φ, Z, P, S, PF, CT ratio, harmonics & more.
Variable auxiliary output 12-220Vdc.
Multi-function auto-ranging timing system.
Current limit mode for fine control.
Data storage to USB memory key including waveform & harmonics USB keyboard/printer interface.
Automatic mains voltage selection.
Designed to comply with BSEN61010 and is CE marked.
Dimensions: 380mm x 314mm x 221mm (Standard Unit).
Weight: 22.6Kg.
T&R 200ADM Warranty: 1 year.
Includes: T&R 200ADM operating manual, output lead set, mains lead and spare fuses.