- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
T&R PCU1-SP MK2 Primary Current Injection System
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The T&R PCU1-SP mk2 is a medium powered primary current injection system offering output currents up to 5000A (11.5kVA for 40seconds). The system consists of a separate control unit containing all metering and control functions and a loading unit that provides the high current output. In addition, the SP version offers direct-reading CT ratio and polarity tests and a 100A secondary injection output.
Two loading units are available, delivering a maximum output current of 2000A or 5000A. Each loading unit has three output taps to allow for a wide range of load impedances. For example, the NLU5000 may be configured to either give a maximum current of 5000A on the 2.3V range, 2500A on the 4.6V range or 1250A on the 9.2V range.
Supply Requirements: 230V±10%, 45-65Hz 1ph 11.5kVA max (23kVA overload for 2s).
Multi-function digital timing system.
Digital true RMS memory ammeter.
Solid state switching.
2000A and 5000A loading units.
Three range outputs on loading units.
Rugged, compact design.
Optional trolley mounting of system.
Secondary injection up to 100A.
Auxiliary metering input.
Direct reading CT ratio and polarity.
Protection and Safety: CE Marked / BS EN61010.
Dimensions: 450(w) x 275(h) x 305mm(d).
Weight: 26kg.
T&R PCU1-SP Warranty: One year.
Includes: Mains lead (5m), loading unit power and metering leads (5m), PCU1-SP operating manual and spare fuses.