- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
T&R KV30-40 MK2 High Voltage AC Test Sets
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The T&R KV30-40 mk 2 unit has an output voltage variable from zero to 30kV with accurate metering on both the output voltage and current. A zero-voltage interlock is provided, ensuring that the output may only be energised with the voltage control at zero. The units T and R KV30-40 case.feature automatic mains voltage selection and an external 24Vdc interlock circuit for connection of emergency off switches aned enclosure interlocks.
The test object and output are protected by an adjustable current trip. The trip level of the T&R KV30-40 may be set to 10-110% of the rated output in 10% steps. Breakdown of the test object is visibly indicated. The unit must be manually reset after a trip condition before testing can be resumed.
The KV30-40 Mk2 series are fitted with a 24Vdc external interlock socket. This interlock prevents the output being energised unless an external circuit is closed. The interlock circuit may also be used to connect normally closed emergency off switches to the unit wired in series with any interlock switches.
0 - 30kV output voltage.
1.2kVA output capability.
Key operated supply switch to prevent unauthorised operation.
Dual overload protection.
Variable electronic trip – 10-110% of rated output.
Voltage and current metering.
Zero-volt interlock.
External 24Vdc interlock circuit.
Visual indication of test piece failure.
Dimensions: 300 x 400 x 470mm.
Weight: 42kgs.
T&R KV30-40 mk2 Warranty: One year.
Includes: Permanently connected 2 metre long HV output lead, T&R ES30 earthing stick, Spare fuses, Earth lead, T&R KV30-40 Operating Manual and Calibration Certificate.