- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
HANNA HI93102 Portable Turbidity Meter
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The most important parameters needed for water analysis, especially in drinking water, can be measured with HANNA’s HI 93102 portable meter. This instrument not only measures turbidity, but also pH, total and free chlorine, bromine, iodine, iron, and cyanuric acid (CYS). Achieve laboratory results in the field quickly and easily.
Measurements are made quickly and repeatedly through a sophisticated, yet easy-to-use microprocessor. In colorimetric mode, users can select between factory preprogrammed calibration or calibrating the meter on their own, and measure either concentration or relative absorbance of the sample. Up to 25 measured samples can be stored in memory together with time and date. Miniaturization of the electronics has made it possible to offer unsurpassed accuracy and quality in a portable unit weighing just one pound!
Specification:
Range Turbidity 0.00 to 9.99 NTU / 0.00 to 50.0 NTU
Bromine 0.00 to 8.00 mg/L (ppm)
Free Cl2 0.00 to 2.50 mg/L (ppm)
Total Cl2 0.00 to 3.50 mg/L (ppm)
CYS 0 to 80 mg/L (ppm)
Iodine 0.0 to 12.5 mg/L (ppm)
Iron LR 0.00 to 1.00 mg/L (ppm)
pH 6.5 to 8.5 pH
Resolution Turbidity 0.01 and 0.1 NTU
Bromine 0.01 mg/L (ppm)
Free and
Total Cl2 0.01 mg/L (ppm)
CYS 1 mg/L (ppm)
Iodine 0.1 mg/L (ppm)
Iron LR 0.01 mg/L (ppm)
pH 0.1 pH
Accuracy @25°C Turbidity ±0.5 NTU or ±5% of reading (whichever is greater)
Bromine ±0.08 mg/L (ppm) ±3% of reading
Free and
Total Cl2 ±0.03 mg/L (ppm) ±3% of reading
CYS ±1 mg/L (ppm) ±15% of reading
Iodine ±0.1 mg/L (ppm) ±5% of reading
pH ±0.1 pH
Calibration two points; selectable between 0.00 - 50.0 FTU (0.00 and 20.0 FTU recommended)
Light Source pure green LED
Light Detector silicon photocell
Battery Type / Life 1.5V AA (4) / approximately 60 hours of continuous use or 1000 measurements; automatic shut-off selectable after 10, 20, 30, 40, 50 or 60 minutes
Environment 0 to 50°C (32 to 122°F); RH max 95% (non condensing)
Dimensions / Weight 220 x 82 x 66 mm (8.7 x 3.2 x 2.6’’) / 510 g (1.1 lb.)