- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
TENMARS TM185D Data Logger LED Humidity and Temp Monitor
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
Ideal for temperature, humidity monitoring and control in critical areas, this wall mounted, LED type is easy to read. Features high and low limit temperature and humidity alarm, USB interface and a data logging capacity of 30, 000 records. Temperature accurate to + / - 1.8 F ( + / - 1 C) . RH measurement accuracy is + / - 2% .
Specification:
Temperature range : -20° C to 60° C / F
Accuracy : + / -1.0° C ( -5.0° C to 40.0° C ) ; others + / - 2.0° C
Resolution : 0.1° C
Update rate : 1 time/ sec
Sensor type : Diode
Relative Humidity range : 5% to 95%
Accuracy @ 25° C : + / -2.0% RH ( 35% to 80% RH ) ; + / -2.5% RH ( 10-35% , 80-90% ) ; other + / -5%
Resolution : 0.1% RH
Response Time : Below 4 secs
LED Display : 214* 120mm ( 8.4* 4.73 inch )
Power supply : AC to DC adaptor ( 9v / 1A )
Battery backup : DC 9V battery enables continued measuring during power disruptions
Size/ Weight : L260 x W178 x H47mm / 1000g