- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
GENERAL PIPE Gen-Eye Hot-Spot Digital Pipe Locator
Harga dapat berubah sewaktu-waktu mengikuti perkembangan kurs rupiah terhadap mata uang asing lainnya sehingga sangat mungkin terjadi adanya perbedaan harga yang berlaku dengan harga yang tertera pada website kami.
The new Gen-Eye Hot-Spot pipe locator makes locating easy. Its total field antenna array and on-screen icons lead you right to your target, without the long learning curve
Whether you’re an experienced pro or a first time user, you can quickly locate inspection cameras, sondes, active power lines and utility lines with pinpoint accuracy.
No need to interpret numbers and bar graphs.
The easy-to-see auto backlit LCD display shows you the way with arrows that point you in the right direction every time. Utility line location and active buried power line locating is just as easy.
The Hot-Spot is the industry’s most rugged pipe locator. Rated at IP65, it is dust and dirt proof, and water resistant. It passed the one meter drop test and the screen passed the 18” steel ball drop test.
HOT-SPOT PIPE LOCATOR FEATURES
Superior Battery Life
Lasts approximately 30 hours – more than twice as long as others. Automatic shutdown feature saves power.
Expanded Frequencies
Locates two sonde frequencies, two power frequencies and four line frequencies (with external transmitter).
Upgradeable Software
Use the USB port to upgrade software in the field or for a screen capture.
Simple, menu-based user interface
No need for multiple screens. Easy-to-access menus make it easier to use than other pipe locators.
Easy to read display
Icons lead you to your target. Auto backlight lets you locate in dimly lit areas.
Total field antenna array
Allows you to locate from any direction.
Line direction compass
Tells you the lay of the pipe.
Industry’s most rugged pipe locator:
Its IP65 rating is the industry’s highest for performing in dusty, dirty or wet jobsite conditions. Passed 1-meter drop test; screen passed 18″ steel ball drop test.
Made in U.S.A.
SPECIFICATIONS
Camera/Sonde Frequencies:
512 Hz and 33KHz
Line/Utility Frequencies:
1KHz, 8KHz, 33KHz, 65KHz
Active Power Line Frequencies:
60/50Hz and 180/150Hz
Depth Range:
10 ft. in cast iron pipe/20 ft. in clay or plastic
Screen:
LCD Digital Signal Read-Out, Graphic Display, Directional Arrows, Null Icon, Camera Icon, Utility Icon, Audible Tone, Auto Digital Depth, Battery Status, Auto Backlight
Antenna Configurations:
Total Field, Single Peak, Twin Peak, Null and Left/Right (Line Location Only)
External Ports:
Mini USB
Weight:
4.8 lbs./2.18 Kg
Batteries:
2 D-cell alkaline (Approximately 30 hours of life)
Operating Temperature Range:
-4° F to 122° F (-20° C to 50° C)