Categories
- Air Quality Meter
- Anemometer
- Battery Analyzer
- Calibrator Tester
- Chart Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current Injection Test
- Current Load Bank
- Current Meter
- Data Logger
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Echosounder
- Fault Finder Locator
- Fire Protection
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Oil
- Light Meter
- Manometer
- Mass Flow Meter
- Metal Detector
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Test Analyzer
- Oscilloscope
- Other Products
- PH Meter
- Pipe Cable Locator
- Planimeter
- Power and Voltage
- Power Quality Meter
- Power Source
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Spectrum Analyzer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Water Sampler
- Weather Station
- Wood Moisture Meter
Coating Thickness
The BESANTEK BST-CTG03 2 In 1 Digital Coating Thickness Meter Designed for Measurement of Ferromagne..
Rp. 16,500,000
The BESANTEK Corporation BST-CTG04 2-In-1 Digital Coating Thickness Gauge is designed for the measur..
Rp. 18,500,000
The 3000EZ Series Coating Thickness Gauge provides fast, non-destructive, accurate coating measureme..
Rp. 22,500,000
The 3000EZ Series Coating Thickness Gauge provides fast, non-destructive, accurate coating measureme..
Rp. 28,500,000
Features:
3 Models
DCF-3000FX - Ferrous Only Model
DCN-3000FX - Non-Ferrous Only Model
DCFN-3000..
Rp. 30,000,000
Features:
3 Models
DCF-3000FX - Ferrous Only Model
DCN-3000FX - Non-Ferrous Only Model
DCFN-3000..
Rp. 38,500,000
Features:
3 Models
DCF-3000FX - Ferrous Only Model
DCN-3000FX - Non-Ferrous Only Model
DCFN-3000..
Rp. 30,000,000
Range 0 to 1 inch (0-25 mm)
Resolution 0.0001 inch (0.002 mm)
The Standard MTG Mater..
Rp. 42,500,000
300 Series for 300mm Jaw Depth (12")
500 Series for 500mm Jaw Depth (20")
Measuring Range: 0 -..
Rp. 23,500,000
PaintCheck provides fast, non-destructive coating thickness measurements on steel and non-ferrous me..
Rp. 19,500,000
Features:
Auto probe recognition with Auto Zero or Manual Zero.
Wide variety of dual-element probe..
Rp. 60,000,000
Features:
Auto probe recognition with Auto Zero or Manual Zero.
Wide variety of dual-element probe..
Rp. 72,500,000
Features:
Auto probe recognition with Auto Zero or Manual Zero.
Wide variety of dual-element probe..
Rp. 72,500,000
Features:
Auto probe recognition with Auto Zero or Manual Zero.
Wide variety of dual-element probe..
Rp. 85,000,000
CorDEX designed Intrinsically Safe Thickness Gauge UT5000 to measure metal thickness on pipelines an..
Rp. 85,000,000
Features:
Powered by a 100MHz DSP platform using FPGA technology.
Two Channels - Dual pulsers and ..
Rp. 60,000,000
Features:
Powered by a 100MHz DSP platform using FPGA technology.
Two Channels - Dual pulsers and ..
Rp. 68,500,000
Features:
Powered by a 100MHz DSP platform using FPGA technology.
Two Channels - Dual pulsers and ..
Rp. 78,500,000
Features:
Powered by a 100MHz DSP platform using FPGA technology.
Two Channels - Dual pulsers and ..
Rp. 85,000,000
Features:
2 Ranges Available in Basic or Advanced Versions
PT-200B - 0.5 - 40 mils (13 - 1000 micr..
Rp. 65,000,000
Features:
2 Ranges Available in Basic or Advanced Versions
PT-200B - 0.5 - 40 mils (13 - 1000 micr..
Rp. 55,000,000
Features:
2 Ranges Available in Basic or Advanced Versions
PT-200B - 0.5 - 40 mils (13 - 1000 micr..
Rp. 72,500,000
Features:
2 Ranges Available in Basic or Advanced Versions
PT-200B - 0.5 - 40 mils (13 - 1000 micr..
Rp. 60,000,000
Features:
Range: 0 - 60 mils (1500 µm)
Resolution: 0.05 mil / 0.1 mil (1 µm / 2 µm)
Models: 6000-..
Rp. 35,000,000
Features:
Range: 0 - 60 mils (1500 µm)
Resolution: 0.05 mil / 0.1 mil (1 µm / 2 µm)
Models: 6000-..
Rp. 45,000,000
Features:
Range: 0 - 60 mils (1500 µm)
Resolution: 0.05 mil / 0.1 mil (1 µm / 2 µm)
Models: 6000-..
Rp. 30,000,000
Features:
Range: 0 - 60 mils (1500 µm)
Resolution: 0.05 mil / 0.1 mil (1 µm / 2 µm)
Models: 6000-..
Rp. 38,500,000
The Defelsko PosiTector PC 6000-F non-contact powder checker and coating thickness gage offers preci..
Rp. 115,000,000
The Defelsko PosiTector PC 6000-F non-contact powder checker and coating thickness gage offers preci..
Rp. 130,000,000
The Defelsko PosiTector PC 6000-F non-contact powder checker and coating thickness gage offers preci..
Rp. 135,000,000
The Defelsko PosiTector PC 6000-F non-contact powder checker and coating thickness gage offers preci..
Rp. 120,000,000
Features:
Two Models
DFT-F measures non-magnetic coatings on steel.
DFT-FN, measures both non-mag..
Rp. 19,000,000
Features:
Two Models
DFT-F measures non-magnetic coatings on steel.
DFT-FN, measures both non-mag..
Rp. 22,500,000
For the non-destructive measurement of nonmagnetic coatings such as (paint, enamel, plastic, galvani..
Rp. 16,500,000
For the non-destructive measurement of nonmagnetic coatings such as (paint, enamel, plastic, galvani..
Rp. 16,500,000
The Positest-PC measures uncured powder coatings using non-contact ultrasonic technology to predict ..
Rp. 78,500,000
The Elcometer 211, commonly referred to as the "Banana Gauge", has proven to be a successful coating..
Rp. 16,500,000
The Elcometer 211, commonly referred to as the "Banana Gauge", has proven to be a successful coating..
Rp. 16,500,000
Product Description
In addition to the Model E features, Model B features an automatic rotating dis..
Rp. 23,500,000
The Elcometer 456 is available in four different models: E, B, S and T. Each gauge provides the user..
Rp. 28,500,000
Product Description
All New Elcometer 456 Basic Ferrous and Non-Ferrous metal substrate coating thi..
Rp. 32,500,000
The Elcometer 456 is available in four different models: E, B, S and T. Each gauge provides the user..
Rp. 38,500,000
All New Elcometer 456 Basic Non-Ferrous Metal Substrate Coating Thickness Gauge with Integral Probe
..
Rp. 23,500,000
The Elcometer 456 is available in four different models: E, B, S and T. Each gauge provides the user..
Rp. 28,500,000
Part Number // Description
A500C-B // Elcometer 500 Coating Thickness Gauge Model B
A500C-T // Elc..
Rp. 45,000,000
Part Number // Description
A500C-B // Elcometer 500 Coating Thickness Gauge Model B
A500C-T // Elc..
Rp. 48,500,000
Part Number // Description
A500C-B // Elcometer 500 Coating Thickness Gauge Model B
A500C-T // Elc..
Rp. 55,000,000
Part Number // Description
A500C-B // Elcometer 500 Coating Thickness Gauge Model B
A500C-T // Elc..
Rp. 58,500,000
MikroTest is an extremely robust coating thickness gauge, which measures the thickness of non-magnet..
Rp. 28,500,000
Coating Thickness Gauge for quick, precise and non destructive measurement of Electroplating, Nickel..
Rp. 26,500,000
MiniTest 2500 - Basic Model with memory and USB output
MiniTest 4500 - Adds Batch Memory, Bluetooth..
Rp. 38,500,000
MiniTest 2500 - Basic Model with memory and USB output
MiniTest 4500 - Adds Batch Memory, Bluetooth..
Rp. 48,500,000
The MiniTest 650 Series is designed for rugged use and offers high precision performance for field o..
Rp. 31,500,000
The MiniTest 650 Series is designed for rugged use and offers high precision performance for field o..
Rp. 42,500,000
The MiniTest 650 Series is designed for rugged use and offers high precision performance for field o..
Rp. 33,500,000
The MiniTest 70 is a lightweight and handy coating thickness gauge (dft gauge) in a pencil format wi..
Rp. 19,000,000
The MiniTest 70 is a lightweight and handy coating thickness gauge (dft gauge) in a pencil format wi..
Rp. 22,500,000
The new MiniTest 700 Series Coating Thickness Gauges offer a reliable and accurate solution to all y..
Rp. 40,000,000
The new MiniTest 700 Series Coating Thickness Gauges offer a reliable and accurate solution to all y..
Rp. 42,500,000
The new MiniTest 725 coating thickness gauge is the solution to all your coating thickness problems ..
Rp. 36,500,000
The new MiniTest 725 coating thickness gauge is the solution to all your coating thickness problems ..
Rp. 35,000,000
The new MiniTest 700 Series Coating Thickness Gauges offer a reliable and accurate solution to all y..
Rp. 45,000,000
The new MiniTest 700 Series Coating Thickness Gauges offer a reliable and accurate solution to all y..
Rp. 42,500,000
Designed for utmost flexibility for quality control and inspections, All 740 probes can be connected..
Rp. 65,000,000
Designed for utmost flexibility for quality control and inspections, All 740 probes can be connected..
Rp. 62,500,000
Designed for measuring coatings, the MiniTest 7400 Coating Thickness Gauge is used for measuring non..
Rp. 85,000,000
Designed for measuring coatings, the MiniTest 7400 Coating Thickness Gauge is used for measuring non..
Rp. 88,500,000
Designed for measuring coatings, the MiniTest 7400 Coating Thickness Gauge is used for measuring non..
Rp. 115,000,000
Designed for measuring coatings, the MiniTest 7400 Coating Thickness Gauge is used for measuring non..
Rp. 95,000,000
The Extech CG104 is a pocket-sized coating thickness tester that offers quick one-handed operation a..
Rp. 11,500,000
Key Features
The CG204 has a 0 to 1250 µm (0 to 49 mils) measuring range with ±3 percent accuracy a..
Rp. 9,500,000
The Extech CG304 offers a non-destructive way of measuring the thickness of ferrous and non-ferrous ..
Rp. 11,500,000
The LE-200J is a portable coating thickness tester with a built-in printer. This unit can accurately..
Rp. 95,000,000
Up to eight on-line calibrations can be stored as well as 1500 data points with a full statistical p..
Rp. 65,000,000
Product Description
The Mitech MCT200 Coating Thickness Gauge is a portable coating thickness gauge..
Rp. 18,500,000
Portable Coating Thickness Gauge NOVOTEST TP-1M – device for operative non-destructive measuring of ..
Rp. 32,500,000
PCE-CT 100 Thickness Gauge Non-destructive coating and dry film thickness (DFT) measuring device for..
Rp. 48,500,000
Thickness gauge for the detection of coating thickness of ferrous materials such as steel and iron (..
Rp. 12,500,000
PCE-CT 27FN is a Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, ins..
Rp. 25,000,000
The PCE-CT 28 Thickness Gauge for cars is for measuring the thickness of paint and plastic on ..
Rp. 22,500,000
The PCE-CT 30 is a Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, i..
Rp. 32,500,000
PCE-CT 50 is a Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insul..
Rp. 28,500,000
PCE-CT 5000H is a thickness measuring instrument used for the rapid determination of coating thickne..
Rp. 18,500,000
The Phase II PTG-3500 coating thickness gauge can perform two different methods of calculating thick..
Rp. 21,500,000
The Phase II PTG-3550 coating thickness gauge can perform two different methods of calculating thick..
Rp. 23,500,000
The Phase II PTG-4000 coating thickness gauge can perform two different methods of calculating thick..
Rp. 23,500,000
The Phase II PTG-4200 coating thickness gauge can perform two different methods of calculating thick..
Rp. 20,000,000
The BB20 has an innovative dual sensor which enables you to measure the thickness of non-magnetic co..
Rp. 9,500,000
The With the BB30 you can quickly and accurately determine the strength of non-magnetic layers, such..
Rp. 11,500,000
Showing 1 to 89 of 89 (1 Pages)