Categories
- Air Quality Meter
- Anemometer
- Battery Test & Analyzer
- Calibration Tester
- Chart Recorder
- Chlorine Meter
- Clamp Meter
- Coating Thickness
- Concrete Meter
- Conductivity Meter
- Current & Echosounder
- Current Injection Test
- Deadweight Tester
- Density Meter
- Dew Point Hygrometer
- Dissolved Oxygen
- Fault Finder Locator
- Flaw Detector
- Flow Meter
- Force Gauge
- Gas Analyzer
- Gauss Meter
- Grain Moisture
- Ground Resistance
- Hand Pump
- Hardness Tester
- High Voltage Rercue
- Hipot Tester
- Holiday Detector
- Insulation Tester
- Leak Detection
- Level Lube Controller
- Light Meter
- Manometer
- Multimeter
- Networks Analyzer
- Ohm Meter
- Oil Content Analyzer
- Oscilloscopes
- Other Products
- PH Meter
- Pipe Cable Locator
- Power Quality Analyzer
- Power Supply
- Pressure Gauge
- Rangefinder
- Shaft Alignment
- Sound Level Meter
- Spectrophotometer
- Stroboscope
- Tachometer
- Temp. Calibrator
- Thermal Imager
- Thermohygrometer
- Thermometer
- Torque Tester
- Turbidity Meter
- Ultrasonic Thickness
- Vibration Analyzer
- Video Borescope
- Water Level Meter
- Water Quality Meter
- Weather Station
- Wood Moisture Meter
Hardness Tester
The HPE III is the most advanced digital durometer hardness tester found in the market today. Not on..
Rp. 65,000,000
Available Scales: A, B, C, D, DO, O, OO & Asker C
Conforms to: ASTM D-2240, DIN 53505, ISO 868,..
Rp. 25,000,000
The Check-Line AD-300 precision durmometer is designed to measure the hardness of vulcanized or ther..
Rp. 28,500,000
Available Scales: A, B, C, D, DO, O, OO & Asker C
Conforms to: ASTM D-2240, DIN 53505, ISO 868,..
Rp. 35,000,000
Checkline DD-300 [DD-300-OO] Digital Precision Durometer Type OO
Our new DD-300 Durometer range tak..
Rp. 55,000,000
The HP textile durometer accurately measure the hardness / winding density of textile bobbins, beams..
Rp. 28,500,000
The RX-1600 Durometer features a full-sized dial face for readability to within 1/2 point. The RX-16..
Rp. 28,500,000
The QH5 Portable Leeb Hardness Testers are small, robust, precise, repetitive, and easy to use. They..
Rp. 55,000,000
The QH5 Portable Leeb Hardness Testers are small, robust, precise, repetitive, and easy to use. They..
Rp. 85,000,000
The QH5 Portable Leeb Hardness Testers are small, robust, precise, repetitive, and easy to use. They..
Rp. 65,000,000
QH7 Series "HEAVY DUTY" hardness testers are built in an aluminum enclosure for use in the most adve..
Rp. 150,000,000
QH7 Series "HEAVY DUTY" hardness testers are built in an aluminum enclosure for use in the most adve..
Rp. 100,000,000
QH7 Series "HEAVY DUTY" hardness testers are built in an aluminum enclosure for use in the most adve..
Rp. 125,000,000
Features:
Large LCD display with backlight
Easy use
Communicate with printer via wireless IR
Low..
Rp. 65,000,000
Features:
Touch screen, large display with backlight
Easy use
Communicate with printer via wirele..
Rp. 75,000,000
The Handy Hardness Tester model SH-21 differs completely from traditional hardness testers. Instead ..
Rp. 225,000,000
Ultrasonic Hardness Tester (SONOHARDTM) model SH-22A completely differs from conventional testers wh..
Rp. 235,000,000
MH310 Portable Leeb hardness tester
Technical Specifications:
Measuring range：HLD（170～960）HLD ..
Rp. 265,000,000
Large memory could store 100 groups ( Relative to average times 32^ 1 ) information including single..
Rp. 30,000,000
Product Description
The new MH600 portable hardness tester from Mitech utilises the leeb hardness t..
Rp. 32,500,000
MH660 portable Leeb hardness tester is Mitech latest upgrade model,it focuses on user experience and..
Rp. 36,500,000
Leeb probe is used for measuring the hardness of non-ferrous metals, cast iron, coarse-grained mater..
Rp. 75,000,000
UCI hardness tester NOVOTEST T-U2 is designed for rapid non-destructive hardness testing of:
metals..
Rp. 85,000,000
The UCI hardness measuring method complies to ASTM A1038.
The ultrasonic contact impedance (UCI) ..
Rp. 95,000,000
Combined Hardness Tester NOVOTEST T-UD2 is designed for rapid non-destructive hardness testing of :
..
Rp. 95,000,000
The device operates with both UCI (Ultrasonic Contact Impedance) and Leeb (dynamic) probes. User get..
Rp. 145,000,000
PCE-1000N Barcol Hardness Tester Barcol impressor hardness meter with backlit LCD, power-saving auto..
Rp. 42,500,000
The PCE-Instruments PCE-2000N durometer uses the Leeb rebound method. This is a dynamic hardness tes..
Rp. 65,000,000
PCE-950 CE-2500 Metal Hardness Tester Portable handheld pen-sized durometer for use with steel, iron..
Rp. 50,000,000
PCE-2500N Hardness Tester for Metals Portable handheld pen-sized durometer for use with steel, iron,..
Rp. 55,000,000
The Hardness Tester PCE-2600 for measuring surface hardness / OLED / Internal measured value memory ..
Rp. 65,000,000
PCE-2800 Hardness Tester for Metals With built-in printer, internal memory, USB interface, data cabl..
Rp. 65,000,000
The Hardness Tester PCE-2900 Modern, dynamic hardness tester with colour display / Memory / For meta..
Rp. 72,500,000
UCI hardness tester PCE-3000 series Mobile UCI hardness tester / hardness scales HRC, HB and HV / ND..
Rp. 95,000,000
UCI hardness tester PCE-3000 series Mobile UCI hardness tester / hardness scales HRC, HB and HV / ND..
Rp. 125,000,000
UCI hardness tester PCE-3500 for non-destructive hardness measurement / large colour LC display / in..
Rp. 155,000,000
PCE-5000 UCI Hardness Tester Uses the ASTM A1038 ultrasonic contact impedance (UCI) method for metal..
Rp. 225,000,000
PCE-950 Handheld Metal Hardness Tester For use with cast steel, hammered steel, cold-rolled steel, s..
Rp. 38,500,000
Mechanical Hardness tester for measuring the hardness of soft rubber and plastic
The PCE-A Hardness..
Rp. 26,500,000
Hardness tester for measuring the hardness of hard rubber and hard thermal plastic
The PCE-D Hardne..
Rp. 26,500,000
Digital Hardness Tester to measure Shore D hardness in materials such as hard rubber and thermoplast..
Rp. 22,500,000
PCE-DSD-A Durometer Digital durometer measures Shore A hardness in rubbers, plastics and other nonme..
Rp. 68,500,000
DescriptionFeaturesApplicationsSpecificationsDownloads
Loaded with features, this economically pric..
Rp. 55,000,000
Loaded with features, this economically priced portable hardness tester is capable of measuring the ..
Rp. 85,000,000
State of the art, digital portable hardness tester is designed to test the hardness of large hard me..
Rp. 60,000,000
The PHASE II portable hardness tester, Model No. PHT-3300 is an advanced integrated portable hardnes..
Rp. 45,000,000
State of the art, digital tester is designed to test the hardness of large hard metal parts. Loaded ..
Rp. 75,000,000
The Phase II PHT-950 Digital Durometer is crafted and engineered to perform at the highest level of ..
Rp. 18,500,000
The Phase II PHT-975 Digital Durometer is crafted and engineered to perform at the highest level of ..
Rp. 18,500,000
The Equotip 550 is the most versatile all-in-one solution for portable hardness testing. The Portabl..
Rp. 385,000,000
The Equotip 550 is the most versatile all-in-one solution for portable hardness testing. The Leeb ha..
Rp. 285,000,000
Proceq’s roll testing instruments are widely used to quickly and precisely diagnose roll imperfectio..
Rp. 385,000,000
The Equotip Bambino 2 is a handy measuring device for an easy metal hardness test on most diverse pa..
Rp. 135,000,000
The Equotip Bambino 2 is a handy measuring device for an easy metal hardness test on most diverse pa..
Rp. 175,000,000
Leeb impact devices are best suited for on-site testing of heavy, large or already installed parts a..
Rp. 95,000,000
Leeb impact devices are best suited for on-site testing of heavy, large or already installed parts a..
Rp. 65,000,000
Leeb impact devices are best suited for on-site testing of heavy, large or already installed parts a..
Rp. 115,000,000
Leeb impact devices are best suited for on-site testing of heavy, large or already installed parts a..
Rp. 85,000,000
Applications
The professional integrated hardness tester for:
testing where ascription to ..
Rp. 155,000,000
Applications
The professional integrated hardness tester for:
testing where ascription to ..
Rp. 195,000,000
Accurate profiling with unmatched performance
High quality design for increased durability
Fle..
Rp. 125,000,000
This digital scale "A" durometer is capable of measuring the hardness of rubber, elastomers and leat..
Rp. 18,500,000
This rebound hardness tester features a universal D impact device and is capable of displaying measu..
Rp. 65,000,000
Surface Roughness Tester
The Starrett SR160 surface roughness tester is simple, accurate, and of hi..
Rp. 125,000,000
The Starrett SR300 Surface Roughness Tester is a full-featured, powerful and versatile surface rough..
Rp. 150,000,000
The Starrett SR400 Surface Roughness Tester is a full-featured, powerful and versatile surface rough..
Rp. 195,000,000
Precise Hardness Measurement
The TQC Sheen Barcol Hardness Tester provides consistent and reliable ..
Rp. 65,000,000
Description
Brought to you by TQC Sheen, our specialist testing brand, the TQC Sheen Hardness Pen i..
Rp. 32,500,000
Description
Brought to you by TQC Sheen, our specialist testing brand, the TQC Sheen Hardness Pen i..
Rp. 45,000,000
Showing 1 to 69 of 69 (1 Pages)